The Vertiv VRC VRC350KIT is the low ambient heat rejection outdoor unit for the Vertiv VRC split cooling system. The single phase, 120V outdoor unit is compatible with the Vertiv VRC200KIT indoor unit. It has a piping length of 98ft and can be positioned 49ft above or 16ft below the indoor unit of the 3.5kW cooling system. This condenser can operate from -29F to 113F so you can keep your network cool even in winter.
Rack layouts vary greatly and often times it is necessary to mount switches in the back of the cabinet to attain more convenient cabling connections and reduce clutter. While this technique provides several benefits, the air intake is often exposed to elevated air temps as it's air supply has been pre-heated by the servers in the rack that discharge to the rear. Geist's switch cooling product line allows network switches to breathe cool air regardless of where they are mounted in the rack.
The Geist network switch cooling products are available in a wide range of configurations and rack space sizes. Designed to work with 1U to 9U devices and beyond, having the ability to channel air to wide ranges of intake / exhaust configurations such as side intake - rear exhaust, front intake - side exhaust, rear intake - front exhaust.
The SRXCOOL12K SmartRack 12,000 BTU 230V Portable Server Rack Cooling System pumps 12,000 BTU of cooling power into your IT environment to prevent shutdowns, malfunctions and failures caused by overheating or fluctuating temperatures. Part of the SRCOOL® line, this compact, portable unit is perfect for server rooms and other IT environments with heat-sensitive equipment in areas that facility air conditioning can't reach.
The self-contained SRXCOOL12K is capable of cooling a small room using its louvered vent. A built-in evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank.
You can also use the included flexible tube to aim the cold air precisely where it's needed most, such as an overheated rack enclosure or an equipment hot spot. The SRXCOOL12K Portable Rack Air Conditioner also dehumidifies and filters the air, providing better air quality that can enhance equipment performance with little power consumption.
Designed for quick, simple installation, the SRXCOOL12K rolls on durable built-in casters and plugs into a standard Schuko CEE7 outlet. It's programmed to restart automatically after power failures, and you can set the built-in timer for unattended shutdown and startup.
By installing the optional SRCOOLNETLX remote management accessory (sold separately), you can also monitor temperatures, receive alerts, review logs and control settings from anywhere via SNMP, web browser, SSH or telnet.
Network switches, load balancers, and routers typically sit at the top and back portion of the rack. This placement makes it difficult for cold air to travel from the front of the rack to the air intakes of the network switch equipment, increasing chances of failure over time. SwitchAir helps prevent failure by channeling cool air from the front of the rack to the air intakes regardless of where the equipment is mounted.
Benefits
Reduces the chance of network switches overheating by directing cool air to device intakes.
Reduces the likelihood of premature equipment failure due to high intake temperatures.
Improves equipment efficiency by providing network equipment with the same cold aisle temperature as other devices in the rack.
Decreases wrap around hot airflow from the hot aisle to the cold aisle due to missing blanking panels.
The Vertiv VRC100KIT is a self-contained server rack cooling unit that provides reliable and efficient cooling for critical IT equipment located in small server rooms, network closets, and edge computing spaces. This 120V 1ph 60Hz unit delivers up to 3,500 watts (12,000 BTU) of cooling power in a compact form that is also designed for easy installation. The small air cooler takes up only 10U of space in standard 19-inch racks, saving valuable floor area and helping direct cold air towards IT equipment. Variable speed fans and compressor continually match IT loads to help the unit consume energy efficiently. The VRC's high sensible cooling provides the cooling that your IT gear needs. The kit is shipped with all necessary components for deployment by the end user, though installation services are offered. SNMP and ModBus Monitoring cards are included to give users remote access of the unit. The VRC comes with a one-year warranty, that can be extended to a three-year warranty.
The Vertiv VRC VRC351KIT is the low ambient heat rejection outdoor unit for the Vertiv VRC split cooling system. The single phase, 208V outdoor unit is compatible with the Vertiv VRC201KIT indoor unit. It has a piping length of 98ft and can be positioned 49ft above or 16ft below the indoor unit of the 3.5kW cooling system. This condenser can operate from -29F to 113F so you can keep your network cool even in winter.
The Vertiv VRC101KIT is a self-contained server rack cooling unit that provides reliable and efficient cooling for critical IT equipment located in small server rooms, network closets, and edge computing spaces. This 208V 1ph 60Hz unit delivers up to 3,500 watts (12,000 BTU) of cooling power in a compact form that is also designed for easy installation. The small air cooler takes up only 10U of space in standard 19-inch racks, saving valuable floor area and helping direct cold air towards IT equipment. Variable speed fans and compressor continually match IT loads to help the unit consume energy efficiently. The VRC's high sensible cooling provides the cooling that your IT gear needs. The kit is shipped with all necessary components for deployment by the end user, though installation services are offered. SNMP and ModBus Monitoring cards are included to give users remote access of the unit. The VRC comes with a one-year warranty, that can be extended to a three-year warranty.
The Vertiv VRC is a split rack cooling system designed to meet the cooling demands of your most challenging small spaces. It is a space-saving solution designed for small server rooms, network closets, and similar edge computing spaces that lack a double ceiling, building air conditioning, or the ability to handle in-building heat rejection. This system provides up to 3,500 watts (12,000 BTU) of IT cooling and consists of indoor and outdoor units connected with two field installed copper pipes to transfer heat from IT equipment and reject it to the ambient air. The indoor unit can be installed at the top or bottom of most standard racks and occupies only 6U, saving valuable floor area and helping direct cold air towards IT equipment. Variable speed fans and compressor continually match IT loads to help the system consume energy efficiently and lower operating costs. It is ready for multiple remote monitoring options like SNMP and Modbus RTU and is protected with a default two-year warranty.
Housing equipment with side to side airflow creates many challenges for IT and facility managers, particularly in regards to cooling. Because most enclosures are designed for a front to back airflow pattern, it is difficult to maintain ideal operating temperatures on side to side airflow equipment. The Rack Side Air Distribution Unit is a 2U rack mountable air distribution product for networking equipment or servers with side to side airflow. It pulls in conditioned air from the front of the rack and distributes it to the side air intake of the networking equipment.
Resettable circuit breakers - Enables a quick recovery from overload events.
Mounting rails - Adjustable depth allows the unit to fit APC NetShelter enclosures or other 19"" EIA-310-D enclosures.
Fan guards - A safety measure that provides protection from the fan opening by covering the inlet.
Fan control switches - Users can turn one or both fans on and off depending on the heat load.
Dual fans - Provides fault tolerance in the event of a fan failure.
Air turning vane - Directs air up or down the side of the rack, supplying cool air to the inlet of side-to-side airflow equipment.
Housing equipment with side to side airflow creates many challenges for IT and facility managers, particularly in regards to cooling. Because most enclosures are designed for a front to back airflow pattern, it is difficult to maintain ideal operating temperatures on side to side airflow equipment. The Rack Side Air Distribution Unit is a 2U rack mountable air distribution product for networking equipment or servers with side to side airflow. It pulls in conditioned air from the front of the rack and distributes it to the side air intake of the networking equipment.
Resettable circuit breakers - Enables a quick recovery from overload events.
Mounting rails - Adjustable depth allows the unit to fit APC NetShelter enclosures or other 19"" EIA-310-D enclosures.
Fan control switches - Users can turn one or both fans on and off depending on the heat load.
Dual fans - Provides fault tolerance in the event of a fan failure.
Air turning vane - Directs air up or down the side of the rack, supplying cool air to the inlet of side-to-side airflow equipment.
Network switches, load balancers, and routers typically sit at the top and back portion of the rack. This placement makes it difficult for cold air to travel from the front of the rack to the air intakes of the network switch equipment, increasing chances of failure over time. SwitchAir helps prevent failure by channeling cool air from the front of the rack to the air intakes regardless of where the equipment is mounted.
Benefits
Reduces the chance of network switches overheating by directing cool air to device intakes.
Reduces the likelihood of premature equipment failure due to high intake temperatures.
Improves equipment efficiency by providing network equipment with the same cold aisle temperature as other devices in the rack.
Decreases wrap around hot airflow from the hot aisle to the cold aisle due to missing blanking panels.
An Ideal Investment for Keeping Your Rack Equipment Cool and in Reliable Working Condition
This rack-mount air conditioning unit pumps 7,000 BTU/h (2.0 kW) of close-coupled cooling into your IT equipment to prevent shutdowns, malfunctions and other failures caused by overheating and fluctuating temperatures. The SRXCOOL7KRM solves your heat-related problems without requiring the heavy costs of new construction, time-consuming maintenance or installation specialists.
Saves Valuable Floor Space in Your IT Environment
The self-contained SRXCOOL7KRM chassis mounts in 8U of space at the bottom of an EIA-standard rack enclosure to save floor space in a small-to-medium-sized data center, server room or network closet. A directional output vent aims the air upward, directly at rack equipment.
Quiet, Efficient Close-Coupled Cooling Ensures the Cool Air Goes Where Most Needed
A magnetic air dam attached to the front door of the rack enclosure makes sure your rack equipment draws cool air from the SRXCOOL7KRM, rather than drawing warm air from the room. Because it only cools the equipment inside the rack enclosure, the SRXCOOL7KRM is much more efficient than solutions that cool an entire room to achieve the same result. The SRXCOOL7KRM also filters the air, and its built-in evaporator eliminates condensation with no floor drain or water collection tank needed. The unit operates quietly-about the noise level of an average office setting.
Designed for Easy and Convenient Operation
The intuitive control panel includes a dual-digit LCD that displays the current temperature in real time. Pushbuttons and diagnostic LEDs communicate vital operating conditions at a glance. The SRXCOOL7KRM restarts automatically after power failures, and you can set the built-in timer to schedule unattended shutdowns and startups. The 1.8-meter (6-foot) 18 AWG power cord is not terminated with a plug. You are responsible for providing and installing the appropriate plug that complies with local wiring and safety regulations.
Optional Network Interface Offers 24/7 Access
The optional SRCOOLNET2LX remote management accessory (sold separately) allows you to monitor temperatures, receive alerts, review logs and control settings over an Ethernet network from any location via SNMP, Web, SSH or telnet. SRCOOLNET2LX also includes an ENVIROSENSE® temperature and humidity sensor that lets you link cooling output with temperature readings up to 12 feet away. In addition, the optional SRCOOL7KDUCT exhaust duct kit (sold separately) directs and disperses heat through an upper vent into your facility's ventilation system.
7,000 BTU/h (2.0 kW) prevents heat-related equipment malfunctions and downtime
Close-coupled cooling saves energy and reduces your operating costs
Optional network management card enables remote monitoring and control
Self-contained unit with 1.8 m power cord connects to compatible AC power source
Mounts in 8U of space at the bottom of an EIA-standard 19 in. rack enclosure
Network switches, load balancers, and routers typically sit at the top and back portion of the rack. This placement makes it difficult for cold air to travel from the front of the rack to the air intakes of the network switch equipment, increasing chances of failure over time. SwitchAir helps prevent failure by channeling cool air from the front of the rack to the air intakes regardless of where the equipment is mounted.
Benefits
Reduces the chance of network switches overheating by directing cool air to device intakes.
Reduces the likelihood of premature equipment failure due to high intake temperatures.
Improves equipment efficiency by providing network equipment with the same cold aisle temperature as other devices in the rack.
Decreases wrap around hot airflow from the hot aisle to the cold aisle due to missing blanking panels.
Network switches, load balancers, and routers typically sit at the top and back portion of the rack. This placement makes it difficult for cold air to travel from the front of the rack to the air intakes of the network switch equipment, increasing chances of failure over time. SwitchAir helps prevent failure by channeling cool air from the front of the rack to the air intakes regardless of where the equipment is mounted.
Benefits
Reduces the chance of network switches overheating by directing cool air to device intakes.
Reduces the likelihood of premature equipment failure due to high intake temperatures.
Improves equipment efficiency by providing network equipment with the same cold aisle temperature as other devices in the rack.
Decreases wrap around hot airflow from the hot aisle to the cold aisle due to missing blanking panels.
The Vertiv VRC is a split rack cooling system designed to meet the cooling demands of your most challenging small spaces. It is a space-saving solution designed for small server rooms, network closets, and similar edge computing spaces that lack a double ceiling, building air conditioning, or the ability to handle in-building heat rejection. This system provides up to 3,500 watts (12,000 BTU) of IT cooling and consists of indoor and outdoor units connected with two field installed copper pipes to transfer heat from IT equipment and reject it to the ambient air. The indoor unit can be installed at the top or bottom of most standard racks and occupies only 6U, saving valuable floor area and helping direct cold air towards IT equipment. Variable speed fans and compressor continually match IT loads to help the system consume energy efficiently and lower operating costs. It is ready for multiple remote monitoring options like SNMP and Modbus RTU and is protected with a default two-year warranty.
Tripp Lite's award-winning SRCOOL12K, now in its second generation, is a portable, compact, self-contained air conditioning unit designed for server rooms, small network closets, back offices and other areas with heat-sensitive equipment that facility air conditioning can't reach. Design improvements based on customer feedback include upgraded commercial-grade components designed to last longer, including an upgraded hot air exhaust fan. The SRCOOL12K Gen 2 also boasts robust packaging for better protection from shipping damage and an updated two-year warranty. This SmartRack® server rack cooling unit pumps 12,000 BTU (3.5kW) of cooling into your IT environment to help prevent shutdowns, malfunctions and other failures caused by overheating or fluctuating temperatures. It uses environmentally friendly R410A refrigerant to comply with worldwide standards. An easy-to-read control panel with diagnostic LEDs provides convenient local management. Close-coupled cooling delivers cold air near heat loads to discourage recirculation and increase energy efficiency. An included 71-inch flexible hose lets you aim the cold air to a specific spot, such as an overheated rack enclosure or an equipment hot spot. Hot air exits through a window or drop ceiling via an included exhaust kit. An upgraded hot air exhaust fan maintains effectiveness even under a high heat load. The unit also dehumidifies and filters the air, providing better air quality that can enhance operating conditions and equipment reliability. With a 100-percent duty cycle, the SRCOOL12K can run continuously without costly downtime. It uses copper tubing that is stronger than the aluminum tubing used in most consumer cooling units. The copper allows higher pressures and better weld joints to stand up to the constant vibration of the running compressor. The evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank and saving you time and money. No external condenser, refrigerant piping or professional maintenance is required for simple operation. Upgraded firmware allows the compressor to cycle on and off while the evaporator fan stays on to prevent icing in high-humidity environments. Install the optional SRCOOLNETLX network module (sold separately) to monitor temperatures, receive alerts, review logs and control settings from anywhere, anytime, via SNMP, web browser, SSH, telnet or command line interface. The built-in LX Platform's PowerAlert® Device Manager provides a single interface to cycle the connected air conditioner on and off, adjust its fan speed, change its target set point temperature and switch to dehumidification mode. The self-contained SRCOOL12K requires no disruptive construction projects or costly service calls from plumbers or HVAC specialists.
