Tripp Lite Network Card for Select Tripp Lite and Eaton UPS Systems and PDUs
plus Shipping Costs
The WEBCARDLXE is designed to fit specific Eaton Tripp Lite Series SmartPro and SmartOnline UPS systems only. Please verify its compatibility with your model before ordering. It is also backward-compatible with PDUs and UPS systems that currently support the WEBCARDLX management card.
Features | Allows Any Compatible UPS System to Function as a Managed Network Device
WEBCARDLXE turns a compatible UPS system into a managed device on your network. By inserting the network management card into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can access, monitor, control and reboot the managed device from almost anywhere at any time. WEBCARDLXE's HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.
Remotely Monitor and Reboot Network Equipment from Anywhere 24/7
You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and overvoltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices).
Control Access and Stay Informed with Event Notifications
You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXE can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.
Check Environmental Data with an Optional EnviroSense2
When connected to EnviroSense2 modules (sold separately), the WEBCARDLXE can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.
Save Time with Mass Configurations
PowerAlert Element Manager (PAEM) software consolidates different management utilities and simplifies the software-based maintenance of WEBCARDLXE. Its discovery engine identifies supported network solutions to concurrently apply a source configuration to multiple target devices, as well as update firmware on multiple devices.
- Allows full remote access and management via SNMP, web, SSH or Telnet
- Reboots unresponsive equipment remotely without requiring a costly site visit
- Sends user-configurable alerts via SNMP or email
- Optional EnviroSense2 sensors enable site monitoring of environmental status
- Mobile-friendly HTML5-based interface requires no Java for interaction
- 2-year limited warranty
CyberPower RWCCARD100 CyberPower Wireless Cloud Monitoring Card
plus Shipping Costs
- Real-time monitoring: Yes
- Cloud Monitoring: Yes
- Wireless Connection: Yes
- Auto Event Notifications: Yes
- Remote Monitoring: Mobile App and Web-based App
- User Upgradeable Firmware: Yes
- RoHS Compliant: Yes
- Warranty: 3 year
Tripp Lite WEBCARDLXMINI Web Management Accessory Card for Select Tripp Lite UPS Systems
plus Shipping Costs
Allows Any Compatible Tripp Lite UPS System to Function as a Managed Network Device
The WEBCARDLXMINI Web Management Accessory Card turns a compatible Tripp Lite UPS system into a managed device on your network. By inserting it into an accessory slot and using an SNMP network management platform, web browser, SSH or Telnet, you can monitor, control and reboot the device from almost anywhere at any time. Its HTML5-based interface means Java isn't needed to interact with the mobile-friendly PowerAlert® Device Manager.
Remotely Monitor and Reboot Network Equipment from Anywhere 24/7
You can remotely monitor and log site electrical data, UPS self-tests, alerts and power events like blackouts, brownouts and over-voltage conditions. You can also reboot locked network equipment without an on-site visit or disruption of power to other loads (when used with controllable outlets or remotely switchable outlets on select devices). The WEBCARDLXMINI is compatible with Tripp Lite's SmartPro® Extreme Temperature UPS systems when internal temperatures are between 0°C and 70°C.
Control Access and Stay Informed with Event Notifications
You can assign users different levels of access from full administrator to view-only operator. Multiple user support allows viewing by more than one user simultaneously. In addition, you can create an encrypted connection using your web browser's SSL setting. Based on your preferences, the WEBCARDLXMINI can notify you of events and power conditions with email messages or SNMP traps. It can also automatically shut down remote operating systems over your network. Real-time clock support maintains current day and date, even after a UPS shutdown.
Check Environmental Data with an Optional EnviroSense2
When connected to EnviroSense2 modules (sold separately), the WEBCARDLXMINI can control digital outputs and monitor temperature, humidity and contact closure state (features vary by module). Up to three EnviroSense2 modules may be daisy-chained together and mounted magnetically to your rack.
Save Time with Mass Configurations
With a free downloadable utility (available from Tripp Lite's website), you can replicate the configuration of one WEBCARDLXMINI-enabled device to other comparable devices. It's also possible to update the firmware of multiple WEBCARDLXMINIs over the network at the same time.
Hassle-Free Compatibility
The WEBCARDLXMINI supports multiple protocols, including IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2c, SNMPv3, Telnet, SSH, FTP and DHCP. 10/100 Mbps auto-sensing ensures optimal communication compatibility with the current 10/100 Base-T network. DHCP/Manual configuration support permits network settings to be assigned automatically or manually.
- Allows full remote access and management via browser, SNMP, telnet or SSH
- Reboots unresponsive equipment remotely without requiring a costly site visit
- Supports 10/100 Mbps autosensing for communication with an Ethernet network
- Optional EnviroSense2 sensors enable site monitoring of environmental status
- Mobile-friendly HTML5-based interface requires no Java for interaction
- 2-year limited warranty
Tripp Lite UPS Internal Contact Closure Management Accessory Card 3 Relay I/O Mini-Module
plus Shipping Costs
Tripp Lite's RELAYIOMINI allows users to communicate UPS status and events via three contact closure outputs. Installs in the back panel of compatible power modules on select SmartOnline UPS systems only. Requires removal of USB module to install.
- Three relay output contacts
- Input signal to shutdown UPS
- Internal contact closure management accessory card
APC by Schneider Electric AP9641 UPS Management Adapter
plus Shipping Costs
APC UPS Network Management Card 3 (NMC3) allows for secure remote monitoring and control of an individual APC UPS via a web browser, command line interface of SNMP. The configurable notification features keep you informed of problems as they occur.
For protected servers, the included PowerchuteTM Network Shutdown software provides graceful, unattended shutdown in the event of a power outage (certified Vmware Ready, Nutanix Ready, Nutanix-AHV Ready).
Remote UPS Management
Network Management Card 3 Features
Network Management System (NMS) compatible: Make device information available to your preferred NMS by forwarding SNMP traps (events) or polling across SNMP (v1/v2c/v3) using the PowerNet MIB.
Reboot Equipment Remotely: Quickly re-establish availability over your network and save dispatching technicians to remote locations.
Smart Battery Management: Manage and maintain entire battery system with detailed battery information, even battery cartridge parameters, providing early fault warning.
Flash Upgradeable Firmware: Convenient remote installation of UPS firmware updates.
Powerchute Network Shutdown Software: Operating system shutdown with advanced integration support support for VMware® ESX/ESXi & Microsoft® Hyper-V and SCVMM.
APC by Schneider Electric UPS Management Adapter
plus Shipping Costs
- "BACnet/IP Support - Supports reporting UPS information to Building Management Systems or other third party management systems via BACnet/IP (BTL certified) (Single Phase Smart-UPS and Symmetra only).
- Command line interface - Offers simultaneous remote management access through Telnet and SSH
- Compatible with SmartSlot enabled UPSs - Compatible with all SmartSlot UPSs
- Device Encryption - Securely connect via HTTPS/SSL, SSH (up to 2048-bit encryption), SNMPv3
- Expandable Input and Output Ports - Supports the Temperature Sensor, Temperature and Humidity Sensor and Dry Contact I/O Accessory
- IPv6 Support - Capable of operating on a network using IPv6 protocol
- Modbus RS-485 and Modbus TCP support - Enables remote monitoring and interfaces with StruxureWare™ Data Center Expert, building management systems, or other third-party systems.
- Multiple language support - Web browser interface available in English, French, Russian, Chinese, Japanese, Korean, German, Italian, Spanish, Portuguese
- Multiple user access - Supports simultaneous web browser access for up to 8 users and network command line interface access for up to 3 users
- Smart Battery Management Support - Detailed battery information including battery cartridge parameters provides early-warning fault analysis to simplify management of the entire battery system (SRT Smart-UPS only).
CyberPower RMCARD205TAA TAA Remote Management Card
plus Shipping Costs
- Supported Protocols: TCP/IP, UDP, FTP, SCP, DHCP, DNS, SSH, Telnet, HTTP/HTTPS, SNMPv1/v3, IPv4/v6, NTP, SMTP, and Syslog
- Remote management: Web browser, CLI, SNMP or NMS
- Auto shutdown: Workstations, multiple servers
- Auto shutdown clients: 50
- Auto event notification: Email, SMS, SNMP Traps, Syslog
- Remote scheduling: Shutdown, startup, reboot
- Ethernet speeds: 10/100 Mbps
- Environmental Sensor compatible: Yes
- Upgradable firmware: Yes, via FTP or SCP
- Warranty: 3 year
Eaton Gigabit Network Card Remote Management Adapter Gigabit Ethernet for UPS/PDU
plus Shipping Costs
The Eaton Gigabit Network card (Network-M2) is Eaton's latest UPS connectivity device that delivers IT professionals with new and exciting capabilities and features. With faster speed and enhanced cybersecurity, the Gigabit Network Card improves power system reliability by providing warnings of pending issues to administrators and helping to perform orderly graceful shutdown of servers and storage. The new network card works with Intelligent Power Manager (IPM) v1.61 to improve business continuity by triggering policies configured to keep mission critical applications running in the event of power or environmental anomalies, including virtual machine relocation or automated disaster recovery action.
- Gigabit speed: compatible with better performing, cost effective and widely deployed gigabit network switches
- Compliance with Gigabit only datacenter networks
- Cybersecurity enhancements, including stronger encryption, configurable password policy and usage of CA and PKI signed certificates
- Real-time clock with battery backup and NTP
- Increased memory for improved operation and larger data storage
- Modern user experience with latest web technology
- Secure SMTP for email alerts
V7 SNMP Network Card for V7 UPS 1500VA/3000VA Rack Mount
plus Shipping Costs
- Allows control and monitoring of multiple UPS systems across the network from one computer
- Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level)
- Warning notifications via audible alarm, broadcast, Email and SNMP traps
- Historic event data log
- Password security protection and remote access management
CyberPower RCCARD100 CyberPower Cloud Monitoring Card
plus Shipping Costs
- User Upgradeable Firmware: Yes
- RoHS Compliant: Yes
- Warranty: 3 year
- Auto Event Notifications: Yes
- Remote Monitoring: Mobile App and Web-based App
- Real-time monitoring: Yes
- Cloud Monitoring: Yes
- Plug and Play Installation: QR Code for quick installation
Tripp Lite MODBUS Management Accessory Card for UPS Remote Monitoring and Control
plus Shipping Costs
Tripp Lite's MODBUSCARD provides UPS systems with the functionality of communication with PCs via MODBUS. Implements MODBUS RTU protocol. Provides MODBUS functions including Read Coils, Discrete Inputs, Holding Registers, Input Registers, Write Single Coil and Single Register. Provides RS-422/485 and RS-232 interfaces (PC communicates with UPS via RS-422/485 or RS-232 or both at the same time). Three sets of 8 dipswitches support Card ID, RS-232 and RS-422/485 configurations. Includes RS-422/485 and RS-232 communications ports. See manual for detailed setup instructions and full set of functions and configuration options. Compatible with select SmartOnline UPS models only (See UPS product accessory section for compatibility).
- Provides RS-422/485 and RS-232 interfaces
- Internal MODBUS management accessory card
- Simple installation and setup
- Implements MODBUS RTU protocol
Tripp Lite Remote Control Cooling Management LX Platform SNMP Select Models
plus Shipping Costs
Round-the-Clock Access and Control of Cooling Units Prevents Costly On-Site Visits
The SRCOOLNET2LX web interface module installs into select Tripp Lite cooling units and lets you monitor temperatures, receive alerts and control settings from remote locations. Compatible with the SRCOOL2KWM, SRCOOL7KRM, SRCOOL18K, SRCOOL24K and SRCOOL33K air conditioning units, the SRCOOLNET2LX is easy to install, simple to operate, and ideal for back offices, computer rooms, small server rooms and wiring closets.
The Perfect Solution for Off-Hour or Unattended Cooling Applications
The Java-free HTML5-based SRCOOLNET2LX enables full remote access for status monitoring, event notifications, and device management via secure web browser, SNMP, SSH, Telnet or command line interfaces. The built-in LX Platform's PowerAlert® Device Manager (PADM) provides a single interface to cycle the connected air conditioner on and off, adjust its fan speed, change its target set point temperature, and switch to dehumidification mode, so excessive heat won't compromise the performance and reliability of your network equipment. The SRCOOLNET2LX combines with the air conditioner to deliver a reliable cooling solution that does not require on-site management.
Includes the E2MT E2 Environmental Sensor Module
The SRCOOLNET2LX comes with an E2MT module, which can be placed directly inside your rack. You don't need to be on the premises to check the temperature near your rack equipment or make any necessary adjustments. The E2MT module allows you to measure and monitor ambient temperature in your data center environment or control the cooling operation by selecting a target temperature value to ensure that specific network equipment remains cool during operation. The E2MT connects to the SRCOOLNETLX using the included 12-foot USB cable.
Easy to Set Up and Manage
The SRCOOLNET2LX inserts into the air conditioner unit's front SNMP accessory slot. A user-supplied Ethernet patch cable connects the SRCOOLNET2LX's RJ45 port to an Ethernet network. The LX Platform built-in PowerAlert Device manager interface provide a single display for managing both the cooling unit and the E2MT module. You can update the firmware straight from the web interface.
TAA-Compliant for GSA Schedule Purchases
The SRCOOLNET2LX is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
- Recommended for 24-hour off-site access and control of Tripp Lite cooling units
- LX Platform network interface provides 24/7 access and control from anywhere
- Included E2MT module allows remote monitoring of ambient temperature conditions
- Easy to keep up to date with easily downloadable firmware
- Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 2-year limited warranty
Vertiv Liebert IntelliSlot RDU101 – Network Card | Remote Monitoring
plus Shipping Costs
More from the Manufacturer
- The network card provides web access to the installed device via popular web browsers.
- It enables Vertiv software tools and services such as Trellis Enterprise, Trellis Power Insight and LIFE Services.
- It supports environmental monitoring via Liebert SN Sensors for temperature, humidity, leak detection, doors and contact closures.
- The network card allows remote firmware updates via a web browser.
- It sends alarm notifications via SNMP, email and text messaging.
Minuteman UPS Power Management Module
plus Shipping Costs
SNMP-NV6 card is an interface between the UPS and the network. It can obtain the information from a UPS and issue commands to it. SNMP-NV6 card supports two kinds of protocols - SNMP and HTTP for user access. Through the SNMP NMS and Web Browser, the user can setup the SNMP-NV6 card obtain information from the UPS and issue commands to UPS.
SNMP-NV6 card also provides shutdown software that operates with various Operating Systems that can link to the SNMP-NV6 card automatically through the network and communicate with it via SNMP protocol. The shutdown software retrieves the UPS information from SNMP-NV6 card and based on this information can start the shutdown process in order to prevent the abnormal shutdown of the host or server due to power events.
- Telnet Support - for flexible configuration of the SNMP card
- Event Notification - notify multiple IT personnel via SNMP traps or e-mail when a power event occurs
- Multiple server shutdown - using the included SNMP management software allows the UPS to shutdown multiple devices sequentially when a power event occurs
- Track utility problems via Event Logs - to provide history of power events on the UPS including: power quality, equipment draw, and blackouts.
- Schedule events - shutdown or restart connected equipment daily, weekly, or monthly using the integrated scheduler
- Integrate UPS into Network Management System (NMS) - using the inlcluded MIB (Management Information Base) agent or the included SNMP management software
- Network UPS management - monitor and manage the UPS over any computer attached to the network
- Connect the UPS directly to a LAN - utilizing a standard RJ45 Ethernet connection; requires no special application software
Tripp Lite Remote Control Cooling Management LX Platform SNMP for SRCOOL12K
plus Shipping Costs
Round-the-Clock Access and Control of Cooling Units Prevents Costly On-Site Visits
The SRCOOLNETLX web interface module connects to select Tripp Lite portable cooling units and lets you monitor temperatures, receive alerts and control settings from remote locations. Compatible with the SRCOOL12K, SRXCOOL12K and SRXCOOL12KB portable air conditioning units, the SRCOOLNETLX is easy to install, simple to operate, and ideal for back offices, computer rooms, small server rooms and wiring closets. The included 100-240V 50/60 Hz AC power adapter includes NEMA 1-15R and CEE 7/7 Schuko snap-in plug adapters.
The Perfect Solution for Off-Hour or Unattended Cooling Applications
The Java-free HTML5-based SRCOOLNETLX enables full remote access for status monitoring, event notifications, and device management via secure web browser, SNMP, SSH, Telnet or command line interfaces. The built-in LX Platform's PowerAlert® Device Manager (PADM) provides a single interface to cycle the connected air conditioner on and off, adjust its fan speed, change its target set point temperature, and switch to dehumidification mode, so excessive heat won't compromise the performance and reliability of your network equipment. The SRCOOLNETLX combines with the air conditioner to deliver a reliable cooling solution that does not require on-site management.
Includes the E2MT E2 Environmental Sensor Module
The SRCOOLNETLX comes with an E2MT module, which can be placed directly inside your rack. You don't need to be on the premises to check the temperature near your rack equipment or make any necessary adjustments. The E2MT module allows you to measure and monitor ambient temperature in your data center environment or control the cooling operation by selecting a target temperature value to ensure that specific network equipment remains cool during operation. The E2MT connects to the SRCOOLNETLX using the included 12-foot USB cable.
Easy to Set Up and Manage
The SRCOOLNETLX installs securely to the air conditioner unit's remote monitoring port using the included cable. A user-supplied Ethernet patch cable connects the SRCOOLNETLX's RJ45 port to an Ethernet network. The built-in PowerAlert Device Manager interface provides a single display for managing both the cooling unit and the E2MT module. You can update the firmware straight from the web interface.
TAA-Compliant for GSA Schedule Purchases
The SRCOOLNETLX is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
- Recommended for 24-hour off-site access and control of Tripp Lite air conditioning units
- LX Platform network interface provides 24/7 access and control from anywhere
- Included E2MT module allows remote monitoring of ambient temperature conditions
- Easy to keep up to date with easily downloadable firmware
- Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 2-year limited warranty
CyberPower RMCARD205 Remote Management Card
plus Shipping Costs
- Warranty: 3 year
- Upgradable firmware: Yes, via FTP or SCP
- Environmental Sensor compatible: Yes
- Remote scheduling: Shutdown, startup, reboot
- Ethernet speeds: 10/100 Mbps
- Auto event notification: Email, SMS, SNMP Traps, Syslog
- Auto shutdown clients: 50
- Auto shutdown: Workstations, multiple servers
- Remote management: Web browser, CLI, SNMP or NMS
- Supported Protocols: TCP/IP, UDP, FTP, SCP, DHCP, DNS, SSH, Telnet, HTTP/HTTPS, SNMPv1/v3, IPv4/v6, NTP, SMTP, and Syslog
Tripp Lite UPS Web Management Accessory Card SNMP Remote Monitoring
plus Shipping Costs
Keep an eye on site electrical data, UPS device status and logged power-related events, such as blackouts, brownouts and overvoltages. Reboot locked network equipment remotely without disrupting power to other devices when using the TLNETCARD with controllable outlets or remotely switchable outlets available on select Tripp Lite UPS systems.
Tiered access allows three levels of permissions to be assigned to users for monitoring or controlling the UPS. If an electrical or UPS-related problem occurs on-site, you'll be notified immediately via email or SNMP trap.
The TLNETCARD lets you configure and schedule automatic UPS-driven actions, perform UPS-related tests and shutdowns, upgrade firmware and upload configurations from the web interface.
Multiple protocols are supported, including IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and SCP. DHCP/manual configuration support enables network settings to be assigned automatically or manually.
- Web interface does not require the Java Runtime Environment
- Logs power events, alerts and electrical data
- Allows mass configuration and updating of multiple units using TLNET Configurator utility
- Sends user-configurable alerts via SNMP or email
- Enables remote UPS management from virtually anywhere in the world
Eaton DB9 RS-232 Relay/Serial Interface Mini-Slot Card for Eaton 5PX G2, 9SX, and 9PX Lithium-ion UPS Systems
plus Shipping Costs
The Eaton Relay Card-MS enables automatic shutdown and network monitoring of UPS system status through a connected computer with a dedicated adapter that provides the essential dry-contact interface between an Eaton UPS and any relay-connected computer as well as a variety of industrial applications. The Relay Card-MS is compatible with all Eaton UPSs that have a Mini-Slot.
Vertiv Liebert IntelliSlot Unity – SNMP – Network Card | Remote Monitoring Adapter (IS-UNITY-SNMP)
plus Shipping Costs
More from the Manufacturer
- The network card provides web access to the installed device via popular web browsers.
- It enables Vertiv software tools and services such as Trellis Enterprise, Trellis Power Insight, LIFE Services and Liebert Nform.
- The network card allows remote firmware updates via a web browser.
- It sends alarm notifications via email and text messaging.
- It supports third-party protocols for building and network management applications for status and alarms (SNMP only).
CyberPower RMCARD205TAA TAA Remote Management Card
plus Shipping Costs
- Supported Protocols: TCP/IP, UDP, FTP, SCP, DHCP, DNS, SSH, Telnet, HTTP/HTTPS, SNMPv1/v3, IPv4/v6, NTP, SMTP, and Syslog
- Remote management: Web browser, CLI, SNMP or NMS
- Auto shutdown: Workstations, multiple servers
- Auto shutdown clients: 50
- Auto event notification: Email, SMS, SNMP Traps, Syslog
- Remote scheduling: Shutdown, startup, reboot
- Ethernet speeds: 10/100 Mbps
- Environmental Sensor compatible: Yes
- Upgradable firmware: Yes, via FTP or SCP
- Warranty: 3 year
Minuteman Minuteman RPM Series 2-Port Remote Power Manager4
plus Shipping Costs
The RPM1521E is an internet-ready SNMP power management device designed with integrated versatile functions including outlet control, optional temperature monitoring, remote web administration, event alerts, and much more. This RPM helps system administrators or IT personnel monitor and control connected equipment and take preventive measures when needed. It allows an administrator to remotely control the AC power for two connected devices, such as servers, routers, modems, DVRs, security and telephone equipment.
The RPM1521E offers easy setup and a user-friendly interface and control, while allowing network access via Ethernet. Once connected and properly set up, the administrator can manage the AC power of the devices from anywhere in the world through a web browser, greatly reducing the need for on-site service calls.