A/V Receivers & Amplifiers

Compact size audio amplifier with 2 line-in and 1 Microphone input is perfect audio amplifier solution for classrooms, small meeting rooms and lecture halls

• Supports 2x20 Watts @4 ohms default amplifier output or 1x40 Watts @8 ohms (Bridge Connection)
• Volume/Bass/Treble control by push buttons with IR remote control or RS232 software control
• Two stereo audio inputs, switchable by push button, IR remote, or RS232
• MIC supports balance/unbalance signal and effectively suppresses external noise
• Ultra low inrush current, no need for power sequencing. This allows multiple Mini Digital Amplifier to be powered on simultaneously without overloading power circuits
• Antistatic metal case design with efficient convection cooling

The 8 Ohm 50W Audio Amplifier is the ideal solution for supporting a sound reinforcement system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 8 Ohm design. This amplifier supports many advanced features which make it a perfect fit for most applications

Noise Reduction
Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through.

Standby Mode
After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode instantly when a signal is received.

• Listen to deep lows and extreme highs at 20 Hz - 20 kHz frequency
• The sound moves around at 8 Ohm impedance - a joyful journey to audio pitching and loudness, both