C2G 2-way Ceiling Mountable Speaker – 20 W RMS – White
plus Shipping Costs
Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.
Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Handles up to 20 W of RMS power
- Hear low subs and soaring vocals with a frequency range of sound from 100 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional Control 226C/T 2-way In-ceiling Speaker – 150 W RMS
plus Shipping Costs
The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling mount applications.
- Uproar the bass as loud as you want with 150 W RMS power without any blaring
- Hear every detail crisp and clear with a frequency response of 74 Hz-17 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Commercial CSS8008 Ceiling Mountable Speaker – 15 W RMS
plus Shipping Costs
JBL's Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings.
- Handles up to 15 W of RMS power
- Hear every detail crisp and clear with a frequency response of 55 Hz-16 kHz
JBL Professional Control Contractor 28-1L Indoor/Outdoor Wall Mountable, Surface Mount Speaker – 240 W RMS – Black
plus Shipping Costs
High-Output 8-Ohm Indoor/Outdoor
Background/Foreground Speaker
The Control® 28-1L is a two-way 8" speaker with rich sonic character, wide coverage, consistent coverage, versatile mounting, and a contemporary high-design look that fits into a wide range of decors, This makes Control 28-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
- 8" woofer with woven fiberglass cone
- 1" PEI diaphragm tweeter with fluid cooling
- Contemporary, high-design appearance
- Built-in InvisiBall® mounting hardware, plus available U-bracket
- Weather resistant enclosure and transducers
- Wide 100° x 100° coverage
- 120 Watt power handling (240 Watt program)
- High fidelity sound character with broad frequency response of 45 Hz - 20 kHz.
JBL Professional Control Contractor CONTROL 25-1L 2-way Indoor/Outdoor Wall Mountable Speaker – 200 W RMS – White
plus Shipping Costs
Compact 8-Ohm Indoor/Outdoor
Background/Foreground Speaker
The Control® 25-1L is a two-way 5-�" speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1L an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
- 5-�" woofer with woven fiberglass cone
- 3/4" PEI diaphragm tweeter with fluid cooling
- Contemporary, high-design appearance
- Built-in InvisiBall® mounting hardware, plus available U-bracket
- Weather resistant enclosure and transducers
- Wide 100° x 100° coverage
- 100 Watt power handling (200 Watt program)
- High fidelity sound character with broad frequency response of 60 Hz - 20 kHz.
JBL Professional Control 65P/T 2-way In-ceiling Speaker – 150 W RMS – White
plus Shipping Costs
The Control 65P/T is a compact full-range, two-way pendant-type loudspeaker that provides superb sound reproduction and very consistent, wide coverage for rooms with open architecture ceilings and other locations where a pendant form factor is desired.
JBL's patent-pending Radiation Boundary Integrator® (RBI) technology, adapted from the groundbreaking VERTEC™ Series of line array loudspeakers, delivers consistent coverage of the listening area. Combining a large 200 mm (8 in) diameter waveguide with low-frequency projection apertures, the two coaxially-mounted drivers provide a seamless integration of coverage, resulting in extremely even pattern control and coverage where all listeners hear a consistent, high-fidelity sound quality. The wide 120° coverage pattern allows for the use of fewer speakers, reducing the cost of the installed system without sacrificing performance.
- The 2-way In-ceiling speakers provide the finest sound coverage
- Uproar the bass as loud as you want with 150 W RMS power without any blaring
- Listen to deep lows and euphoric highs with a frequency range of sound from 18 Hz-78 Hz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Control 67 P/T 2-way Speaker – 75 W RMS – Black
plus Shipping Costs
Control 67P/T incorporates a large enclosure and high-power 6.5" (165 mm) transducer for extended bass and high-fidelity performance. The extra-large RBI Radiation Boundary Integrator provides outstanding pattern control, which can allow fewer speakers to cover a venue.
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Handles up to 75 W of RMS power
- Listen to deep lows and euphoric highs with a frequency range of sound from 58 Hz-18 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional Control 1 Pro 2-way Bookshelf, Wall Mountable Speaker – 150 W RMS – Black
plus Shipping Costs
Representing the next-generation in professional high-performance, compact loudspeaker systems, the Control® 1 Pro builds on its proud heritage while incorporating the latest innovations in JBL Professional loudspeaker systems design.
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Uproar the bass as loud as you want with 150 W RMS power without any blaring
- Hear every detail crisp and clear with a frequency response of 100 Hz-18 kHz
- Get more execution from your stereo or amplifier with 4 Ohm low-impedance design
JBL Control 328CT In-ceiling Speaker – 250 W RMS
plus Shipping Costs
Control 328CT has been engineered from the ground up to deliver exceptional next-generation performance in a coaxial point source design ceiling loudspeaker.
- Experience body-shaking levels without any room-vibrating reverb or excessive heat output with 250 W RMS power
- Hear low subs and soaring vocals with a frequency range of sound from 60 Hz-16 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Commercial CSS8004 Ceiling Mountable Speaker – 15 W RMS
plus Shipping Costs
JBL's Commercial Series Ceiling Speakers provide excellent performance for paging and background music applications. High sensitivity across the product line provides maximum sound level, even at low tap settings.
- Handles up to 15 W of RMS power
- Hear every detail crisp and clear with a frequency response of 85 Hz-18 kHz
JBL Control C29AV-1 2-way Ceiling Mountable Speaker – 150 W RMS – Black
plus Shipping Costs
The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.
The rotatable high-frequency horn allows use of the speaker in either vertical or horizontal orientation. Consistent coverage ensures excellent sound character throughout the listening area. Moderate magnetic shielding allows use of the speaker as close as 230 mm (9") to video monitors.
- The 2-way Ceiling Mountable speakers provide the finest sound coverage
- Uproar the bass as loud as you want with 150 W RMS power without any blaring
- Listen to deep lows and euphoric highs with a frequency range of sound from 43 Hz-15 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional Control 16C/T 2-way Ceiling Mountable, Blind Mount Speaker – 100 W RMS – White
plus Shipping Costs
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Handles up to 100 W of RMS power
- Hear every detail crisp and clear with a frequency response of 96 Hz-15 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional COL800 Wall Mountable Speaker – 150 W RMS – Black
plus Shipping Costs
The JBL COL800 is an elegant 32-inch (800 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage of most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design-winner of international design awards for industrial design excellence-complements virtually any architectural décor.
A combination of stylish design and outstanding performance features makes the COL800 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.
Four 5-inch x 2.25-inch racetrack woofers provide maximum radiating area in a column form factor. Dual tweeters are located at top of the array for less obstructed coverage of the listening space, and they are aimed at a 10° down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.
A 60-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 150W continuous (600W peak, 2 hrs). The 85 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.
Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).
The COL800 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Available in black (JBL-COL800-BK) or white (JBL-COL800-WH).
Features
- Four 5-inch x 2.25-inch (125 x 55 mm) racetrack woofers & two 0.8-inch (20 mm) tweeters
- 32 inches tall with shallow 3.7-inch (93 mm) cabinet depth
- Wide 160° horizontal and focused 60° vertical coverage
- 10° downward tilt to dispersion aim for covering most listening areas without requiring physical down-tilting of the cabinet
- 150W continuous pink noise power handling (600W peak)
- 85 Hz - 20 kHz frequency range
- Built-in 60W 70V/100V multi-tap transformer, plus 8 ohm direct input
- 116 dB peak SPL (110 dB continuous), 2 hrs
- Dual tweeters near top of column for unobstructed coverage of listening space
- Versatile mounting brackets included -- both close-to-wall L-brackets and low-profile swivel(pan)/tilt wall bracket
- Uproar the bass as loud as you want with 150 W RMS power without any blaring
- Hear every detail crisp and clear with a frequency response of 125 Hz-18 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional COL600 Wall Mountable Speaker – 80 W RMS – White
plus Shipping Costs
The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design-winner of international design awards for industrial design excellence-complements virtually any architectural décor.
A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.
Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.
A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.
Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).
The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Available in black (JBL-COL600-BK) or white (JBL-COL600-WH).
Features
- Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter
- 24 inch tall with shallow 3.7 inch cabinet depth
- Wide 160° horizontal and focused 110° vertical coverage
- 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet
- 80W continuous pink noise power handling (320W peak)
- 70 Hz - 20 kHz frequency range
- Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input.
- 111 dB peak SPL (105 dB continuous), 2 hrs
- Tweeter near top of column for unobstructed coverage of listening space
- Versatile mounting brackets included - both
- Handles up to 80 W of RMS power
- Listen to deep lows and euphoric highs with a frequency range of sound from 105 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
CyberData SIP IP66 Speaker
plus Shipping Costs
The new CyberData SIP IP66 Outdoor Horn provides an easy method for implementing a loud IP-based overhead paging system for loud areas, warehouses, manufacturing areas, and outdoor areas.
Now with up to 9 user-stored messages. The interface is compatible with most SIP-based IP PBX servers that comply with the SIP RFC 3261. For non-SIP environments, the speaker can be configured to listen to multicast address and port number combinations to form paging zones.
- SIP Enhanced interoperability for hosted environments
- CyberData has maintained one of the most comprehensive list of IP PBX servers certified to work with CyberData
- Support for G.711, G.722, G.729 codecs
- 802.11q VLAN tagging
- Configurable event generation for device health and status monitoring
- 9 user-uploadable page messages
- IP66-rated
- Sealed network cable gland
- SIP and Simultaneous Multicast
- Page from Polycom phones
JBL Professional LCT 81C/T In-ceiling Speaker – 40 W RMS – White
plus Shipping Costs
Low-Profile Lay-In 2' x 2' Ceiling Tile Loudspeaker with 200 mm (8 in) Driver
LCT 81C/T is a full-range ceiling speaker designed to lay into a 2 ft x 2 ft US-style suspended grid ceiling, with no cutting of ceiling tiles required, making for an easy and cost-effective installation with a minimum of mess. The low profile depth of only 100 mm (4 in) allows the speaker to fit in locations where deeper loudspeakers do not.
This loudspeaker is designed to provide excellent performance for paging and light-to-medium music in a wide variety of applications, including education classrooms, business music systems, retail stores, music/paging systems, airports, reception/waiting rooms, lounges, courtrooms, meeting rooms, and more.
The very high sensitivity of 96 dB provides maximum sound level, even at low tap settings. LCT 81C/T contains a 200 mm (8 in) dual-cone driver with a very high 96 dB sensitivity. The driver features a 25 mm (1 in) diameter voice coil with a Kapton coil-former and high-temperature wire for better power dissipation and long-term reliability. The speaker's built-in 10 Watt transformer provides versatility by allowing use on 100V or 70V distributed loudspeaker lines, as well as at 8 ohms (low impedance) for driving directly from a low impedance power amplifier. Adjusting is convenient via a rotary switch on the side of the rear enclosure. Two safety seismic attachment tabs are provided for securing to ceiling deck, plus 4 holes are provided -- one in each corner. The color of the perforated grille is white.
- Designed for high speech intelligibility.
- Very high 96 dB sensitivity turns power from small amplifiers into maximum sound level for listeners.
- Easy bare-wire connection in protected compartment. Wire entrance from either top or side via knock-out.
- Very low-profile at just 103 mm (4.1 in) deep, to fit into ceilings that are shallow or that contain obstructions.
- 10 Watt multi-tap at 70V/100V with taps at 10W, 5W, 2.5W (and 1.3W for 70V only)
- 20 Watts at 8? (low-impedance) direct setting.
- Combined 70V/100V and low impedance direct operation.
- Perforated metal grille included.
- Easy lay-in installation into 2' x 2' US-style suspended grid ceilings. No cutting of ceiling tiles is necessary.
- High efficiency 200 mm (8 in) dual-cone driver.
JBL Professional COL600 Wall Mountable Speaker – 80 W RMS – Black
plus Shipping Costs
The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design-winner of international design awards for industrial design excellence-complements virtually any architectural décor.
A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired.
Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall.
A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech.
Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall).
The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Available in black (JBL-COL600-BK) or white (JBL-COL600-WH).
Features
- Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter
- 24 inch tall with shallow 3.7 inch cabinet depth
- Wide 160° horizontal and focused 110° vertical coverage
- 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet
- 80W continuous pink noise power handling (320W peak)
- 70 Hz - 20 kHz frequency range
- Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input.
- 111 dB peak SPL (105 dB continuous), 2 hrs
- Tweeter near top of column for unobstructed coverage of listening space
- Versatile mounting brackets included - both
- Handles up to 80 W of RMS power
- Hear every detail crisp and clear with a frequency response of 105 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
JBL Professional Control Control 25-1 2-way Indoor/Outdoor Wall Mountable Speaker – 200 W RMS – Black
plus Shipping Costs
Compact Indoor/Outdoor Background/Foreground Speaker
The Control® 25-1 is a two-way 5" speaker with rich sonic character, wide coverage, consistent dispersion, versatile mounting, and a contemporary high-design look that fits into a wide range of decors. This makes Control 25-1 an excellent choice for a wide variety of applications, including retail stores, restaurants, health clubs, theme parks, educational facilities, hospitality, music cafes, leisure venues, and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Experience body-shaking levels without any room-vibrating reverb or excessive heat output with 200 W RMS power
- Listen to deep lows and euphoric highs with a frequency range of sound from 85 Hz-17 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G In-ceiling Speaker – 12 W RMS – White – TAA Compliant
plus Shipping Costs
- 8 inch outer diameter dual cone speaker with 100° coverage angle
- 5 oz. magnet with an 8 Ohm impedance
- Plenum rated enclosure
- Seismic tie-off points
Electro-Voice SX100+ 2-way Speaker – 200 W RMS – Black
plus Shipping Costs
The Electro-Voice Sx100+ is a 200-watt, 12-inch two-way, high efficiency, constant-directivity portable speaker system. Through the extensive use of computer-aided design and modeling, Electro-Voice engineers have developed a state-of- the-art professional loudspeaker system. Its performance and physical design make it perfect for many applications requiring quality sound in portable and fixed environments.
- Experience body-shaking levels without any room-vibrating reverb or excessive heat output with 200 W RMS power
- Hear every detail crisp and clear with a frequency response of 60 Hz-25 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G 2-way Wall Mountable Speaker – 30 W RMS – Black
plus Shipping Costs
Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.
Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Handles up to 30 W of RMS power
- Hear low subs and soaring vocals with a frequency range of sound from 100 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G 2-way Wall Mountable Speaker – 30 W RMS – Black
plus Shipping Costs
Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.
Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.
- The 2-way Wall Mountable speakers provide the finest sound coverage
- Handles up to 30 W of RMS power
- Hear low subs and soaring vocals with a frequency range of sound from 100 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G Ceiling Speaker – 2×2 Drip In Ceiling Speaker – 70/25V – Plenum Rated
plus Shipping Costs
- 8 inch outer diameter dual cone speaker with 100° coverage angle
- 5 oz. magnet with a TBLU-5W-25/70V transformer
- Plenum rated enclosure
- Seismic tie-off points
JBL Professional AWC82 2-way Indoor/Outdoor Bracket Mount Speaker – 250 W RMS – Black
plus Shipping Costs
- The 2-way speakers give smooth and precise production of sound to deliver an ultimate audio experience
- Knock yourself out with 250 W RMS power
- Hear every detail crisp and clear with a frequency response of 80 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G 2-way Wall Mountable Speaker – 20 W RMS – Black
plus Shipping Costs
This wall mount speaker is the perfect solution for K-12 classrooms, conference rooms or other learning, sharing and collaborating environments that require a sound reinforcement system for multimedia presentations, video clips, and movies. The wall mount configuration allows this speaker to be securely mounted to a wall or other flat surface. This speaker is built to an 8Ohm industry standard and integrates seamlessly with the TruLink® Audio Amplifier to provide a complete sound system. Additionally, this speaker can be combined with the TruLink® A/V controller and RapidRun® for a complete connected A/V solution.
Wall mount speakers work best in rooms with sharp angles, room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. These speakers disperse sound at 120 degrees for full classroom coverage. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.
- The 2-way Wall Mountable speakers provide the finest sound coverage
- Handles up to 20 W of RMS power
- Listen to deep lows and euphoric highs with a frequency range of sound from 100 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers
C2G 2-way Ceiling Mountable Speaker – 30 W RMS – White
plus Shipping Costs
Cables To Go classroom speakers are specifically designed for use in K-12 classrooms to deliver high quality audio from multimedia presentations, video clips, movies and other curriculum throughout the classroom. This line of speakers is offered in both wall mount and ceiling mount configurations to meet the needs of different classroom designs. Available in industry standard 8 Ohm and 70 volt versions, these speakers ensure long life and quality sound. The Cables To Go Classroom Speakers integrate seamlessly with the TruLink Audio Amplifier to provide a complete classroom sound system. Additionally, the speakers can be combined with the TruLink A/V controller and RapidRun for a complete connected classroom.
Ceiling speakers mount easily for a clean, unobtrusive look while dispersing sound down to students at 125 degrees for full classroom coverage. Wall mount speakers work best in classrooms with sharp angles or room partitions (alcoves) or in rooms where ceiling mounting is not a practical option. Designed for long life, rubber surrounds and poly cone construction provide a durable solution that will not degrade over time compared with paper/foam constructed speaker components.
- The 2-way Ceiling Mountable speakers provide the finest sound coverage
- Handles up to 30 W of RMS power
- Listen to deep lows and euphoric highs with a frequency range of sound from 90 Hz-20 kHz
- 8 Ohm impedance extracts maximum power so you will get more output from your speakers