StarTech.com StarTech.com Professional Multi Function RJ45 RJ11 USB and BNC Cable Tester – Remote Cable Tester – Network testing device
plus Shipping Costs
Plugable Electric Voltage Measuring Device
plus Shipping Costs
For a multimeter, the Plugable USB-C Amperage and Voltage Tester (USBC-VAMETER3) manages to fit a lot of useful features into a sturdy little package. About the size of a USB flash drive, this bidirectional USB tester allows for full USB data passthrough while it monitors USB-C power and charging, measures voltage and amperage, even visualizes the directional flow of electrical current-all in real time.
Connect the USBC-VAMETER3 inline between a USB-C host system like a laptop, tablet, or cell phone and a charger to use it as a USB voltage meter or power consumption meter. An updated OLED screen means a brighter and easier-to-read display in any lighting conditions, and a new orientation button lets you flip the screen with a click.
How it works:
This meter is a transparent interposer-it should not interfere with the USB data (1.1 through 3.1 Gen 2), USB-C Alternate Mode video, or USB-C charging. The meter can be used in-line with USB-C docking stations, chargers, and other USB-C accessories. The meter is able to achieve this without interfering with normal USB-C operation as it only taps into the power (VBUS) and ground connections to measure values and leaves the data lines untouched.
Common uses:
Connecting between a USB-C host system like a laptop, tablet, or cell phone and a charger to monitor charge information.
Connecting between a USB-C host and docking station to monitor charge information.
Connecting between a USB-C host system and a USB-C bus powered accessory like an external hard drive, flash drive, etc to measure power draw of a device.
Testing for USB-C port spec compliance such as a VBUS hot condition, voltage drop under load, etc.
Important notes:
This meter is not meant to replace professional USB-C test equipment, it is designed for quick/easy measurements for users of any skill level.
Not compatible with Intel Thunderbolt 3 devices.
Specifications:
Meter is bidirectional and can be connected in any direction
Supports 4.5-50V, 50mA-6.5A operating range
Support USB-PD R3.1 Extended Power Range (101W-240W)
Supports all USB data (1.1 through 3.1 Gen 2)
Fluke Networks Test Set + TDR, ABN with Piercing Pin
plus Shipping Costs
The innovative TS®54 TDR (Time Domain Reflectometer) is perfect for voice, data and video technicians and communication service provider technicians who need a best-in-class test set. There's nothing else like the TS54 TDR on the market today. No longer will you need to carry a separate TDR, toner, pair identifier-everything you need is in one newly redesigned and compact test set-that's a 62% weight reduction and a 20% cost reduction over existing products.
The TS54 delivers 20% more extreme weather protection with the latest advancements to our patented RainSafe™, DropSafe™ and DataSafe™ technology. This means the TS54 is weatherproof and rugged and able to butt in on live DSL lines to test POTS quality without crashing data service.
Tripp Lite MTP / MPO Fiber Optic Loopback Tester Multimode 50/125um OM3
plus Shipping Costs
- 50/125 OM3 6-Fiber
- MTP / MPO Loopback for 40GbE QSFP+ Optical Testing
Tripp Lite USB-A Voltage & Current Tester Kit w/ LCD Screen USB 3.1 Gen 1
plus Shipping Costs
Features
Determine Volt and Amp Capacity of Your USB-A Cable, Charger or Port in Real Time
You need to know when your USB devices are receiving an acceptable and proper charge. You also need to know the power requirements of your PC, laptop, tablet, MacBook, Ultrabook or Chromebook, so you can determine which USB cables, hubs and chargers work most efficiency with them. This USB-A voltage/current tester connects between the USB source you wish to test and a connected USB device to determine the voltage and amperage.
An Ideal Tool for Immediate Troubleshooting
You'll be able to quickly and accurately detect defective USB cables, chargers and ports in your various devices at home or on the go. Recommended for use with multiport USB chargers and hubs, this tester kit ensures each connected device is receiving the appropriate amount of power from its USB port. An easy- to-read LCD screen displays the voltage and amperage in real time. Dual LEDs indicate whether voltage or current is being displayed on the LCD.
Plug-and-Play Tester Comes Ready to Connect Right Away
The T050-001-USB-A requires no software or drivers to download and install and no connection to external power. It supports USB 3.1 Gen 1, but is also backward compatible with previous USB versions, so you can use it with USB 3.0, 2.0 and 1.1 ports and devices.
Sleek Miniature Housing Designed for Everyday Workspace Use or Connecting on the Go
The compact unit is designed for convenient positioning within your reach, allowing you to monitor voltage and current while not taking up much workspace. It is also tiny enough to pack in your pocket, purse or laptop bag for use in a hotel, conference room, trade show or airport.
- Tester works with any USB-A cable, charger or port on your PC, laptop or tablet
- Monitor cable or charger in real time while simultaneously charging a USB-A device
- Easy-to-read digital display switches between voltage and amperage information
- Dual color LEDs indicate whether voltage or current is being displayed on screen
- Ideal for fast-testing devices/cables at a remote workspace, conference or trade show
Fluke Networks VisiFault Visual Fault Locator – Cable Continuity Tester
plus Shipping Costs
In today's fast-paced workplace maximizing productivity is essential. Whether installing new fiber links or troubleshooting an existing network, the faster you can locate a problem, the faster you can fix it. That's easier said than done when you are faced with a complex network of fibers, connectors and patch cords.
You can diagnose and repair simple fiber link problems with Fluke Networks' VisiFault™ Visual Fault Locator(VFL). The laser-powered VisiFault locates fibers, verifies continuity and polarity. This cable continuity tester helps find breaks in cables, connectors and splices. Continuous and flashing modes make for easier identification. Compatible with 2.5mm and 1.25mm connectors for easy connection. Ruggedly constructed for demanding field-testing. Long battery life for hours of use.
Fluke Networks IntelliTone Pro 200 LAN Toner
plus Shipping Costs
Get advanced vision for locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our new IntelliTone Pro 200 LAN Toner and Probe Kits finds the cables others can't.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one tool. That means it's equipped with the most powerful cable location technologies for any work environment. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.
The IntelliTone™ Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles. This network cable toner and probe's breakthrough digital technology makes it the first tool to tone and trace safely and effectively on active networks.
Intellinet Network Solutions Net Toner and Probe Kit, Tone Generator
plus Shipping Costs
? Two position switch for single or multi-tone signal
? LEDs for line polarity, continuity and voltage
? Enhanced talk battery mode provides power for voice communications over inactive pairs
? Testing leads and modular cables for individual wire tests or modular jack tests
? Replaceable plastic tip to prevent accidental shorts
? Trace or identify wire or cables in a bundle or group
? Alligator clips, RJ45 jack, RJ12 plug, optional F-connector
? Three-year warranty
Tripp Lite Cable Tester Wire Tracker Tone Generator RJ45 RJ11 BNC w LED
plus Shipping Costs
- Included headphones for use in noisy areas
- LED flashlight on remote probe unit
- Perform wire mapping on RJ45 cables
- Find a short or breakage in non-powered wires
- Find an RJ11, RJ45 or BNC cable among group of cables
NetAlly LinkRunner AT 4000 Advanced Network & Cable Tester
plus Shipping Costs
Advanced Copper and Fiber Network Testing, Diagnostics, Discovery, and Mapping
- Provides deep visibility, diagnostics, and packet capture for network technicians and engineers to quickly resolve issues impacting single or multiple devices and network segments.
- Automatically discovers, inventories, and documents network infrastructure devices, endpoints, and connection paths across multiple VLANs and subnets; detects common problems and generates topology maps in Link-Live.
- Comprehensive AutoTest validates and troubleshoots all aspects of network connectivity and services.
- Verifies available link speed from 10Mbps to 10Gbps, tests PoE, identifies connected switch port and VLAN.
Overview
The LinkRunner AT 4000 is an advanced cable and network tester for Multigigabit NBASE-T and fiber Ethernet networks, including comprehensive network discovery and topology mapping with advanced diagnostics and problem detection for in-depth troubleshooting.
Using network discovery and layer 2 and 3 path analysis, the LinkRunner AT 4000 offers comprehensive network visibility to help resolve issues impacting multiple devices - not just a single link - while still providing the automated tests for moves/ adds/changes validation and troubleshooting that the LinkRunner AT family of test solutions is known for.
Test results can be automatically uploaded to the Link-Live collaboration, reporting, and analysis platform to improve teamwork between network engineers and technicians, creating greater job visibility, better project control, and improved tester fleet management. Independent management plane via wired or Wi-Fi connection (with optional adapters) allows remote operation and result uploading separate from the network under test.
Fluke Networks Mulitmode Fiber Distance and Fault Locator
plus Shipping Costs
VFLs work well for exposed lengths of fiber near a patch panel by illuminating bad connections and breaks. They are not very helpful for cable runs more than a few meters, or when the cable not visible or accessible, or when the laser light can't penetrate the jacket.
Optical Time Domain Reflectometers (OTDR) provides graphical data and analysis along the entire length of a cable, way beyond the reach of a VFL, but they can be expensive and require more time to and skill to operate.
Fiber QuickMap fills the gap between a VFL and an OTDR. These models have the simplicity of a VFL, and provide distance and power information on high losses, breaks, and the end of the fiber. They also identify live fiber
Fluke Networks TS30 30800009 Device Tester
plus Shipping Costs
Recognized as the industry standard for basic test sets, the TS30 Test Set provides superior quality at an affordable price. With its high impedance Monitor for DataSafe operation, technicians can clip onto a line in Monitor mode without disrupting existing traffic. Fluke Networks' unsurpassed RainSafe™ protection standards and DropSafe durability assure the test set will keep working even in the toughest environments. Solid weatherproofing provides enhanced resistance to severe weather conditions.
Fluke Networks OptiFiber Pro OFP2-100-QI Cable Analyzer
plus Shipping Costs
OptiFiber® Pro is the industry's first OTDR built from the ground up to meet the challenges of enterprise fiber optic infrastructures. This troubleshooting and certification tool combines uncomplicated power, unparalleled efficiency and the exact functions needed for troubleshooting campus, data center and storage fiber networks.
The OptiFiber® Pro OTDR elevates fiber optic testing with the industry's only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable testing of fiber patchcords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool.
SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end.
- First OTDR with a smartphone user-interface
- Industry's shortest event and attenuation dead zones
- Accelerate fiber certification with the fastest set-up and trace times
- SmartLoop™ technology enables the testing of two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.
- Versiv™ modular design supports copper certification, fiber optic loss, OTDR testing and fiber end-face inspection
- Instantaneous bi-directional averaging results included at no charge
- Improve resource utilization with custom configurations for projects and users
- Simplify use with "DataCenter OTDR™" mode and EventMap™ view
- Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.
Fluke Networks TS19 Test Set
plus Shipping Costs
The TS19 Test Set combines all the essential test set features at a value price. The TS19 Test Set was specifically designed for in-house telecom technicians.Its high-impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.
NetAlly LinkRunner AT 3000 Network & Cable Tester
plus Shipping Costs
Next Generation Copper and Fiber Ethernet AutoTester
- Comprehensive AutoTest validates and troubleshoots all aspects of network link connectivity and services.
- Verifies available link speed from 10Mbps to 10Gbps, tests PoE, identifies connected switch port and VLAN.
- Enables frontline technicians to quickly and thoroughly validate links, troubleshoot device connectivity, and document moves, adds, and changes.
Overview
The LinkRunner AT 3000 is designed for frontline technicians who need fast and comprehensive validation of copper and fiber network links with powerful network connectivity troubleshooting. While offering the same core functions of its predecessors (LinkRunner AT 1000 and 2000 models), the LinkRunner AT 3000 features a large touchscreen and in-depth AutoTest that provides deeper network visibility.
With tools designed to help with network changes and troubleshooting, this network tester's quick cable test and switch identification functionality facilitates installation validation and fast problem isolation.
Test results can be automatically uploaded to the Link-Live collaboration, reporting, and analysis platform to improve teamwork between network engineers and technicians, creating greater job visibility, better project control, and improved tester fleet management. Independent management plane via wired or Wi-Fi connection (with optional adapter) allows remote operation and result uploading independent of the network under test.
Fluke Networks LinkIQ Cable + Network Tester
plus Shipping Costs
The LinkIQ™ Network+Cable Tester is designed to provide trusted cable testing along with network testing professionals need to do their jobs. LinkIQ™ validates cable performance (up to 10 Gig) using frequency-based measurements and provides distance to fault information along with a wire map of the cable under test. The LinkIQ™ also performs nearest switch diagnostics to identify key network issues and validate switch configuration eliminating the need of using another device. Additional features include, Analog and Digital Toning, Port Blink, 802.1x authentication, Remote Office Locators, and the ability to manage results via LinkWare™ PC.
- Measure network capacity up to 10 Gig via frequency based measurements
- Troubleshoot active networks by providing connected switch information (Switch Name, Port Number, and VLAN info)
- Install and troubleshoot PoE devices via Switch Negotiation and PoE Load test
- Graphical wiremap and length test to identify common faults that occur with cabling installation
- Document work through LinkWare™ PC reporting
- Support all Industrial Ethernet Protocols (EtherNet/IP, PROFINET, EtherCAT, and others)
- Industrial Ethernet Kit supports Industrial Connectors (M8D, M12D, M12X)
TRENDnet Network Cable Tester, Tests Ethernet, USB And BNC Cables, Accurately Test Pin Configurations up to 300m (984 ft), Local And Remote Testing, Includes BNC To Ethernet Converters, White, TC-NT2
plus Shipping Costs
- ACCURATELY CHECK CABLES & PORTS: The comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports.
- CABLE TESTING DISTANCE: Tests over cables lengths of up to 300 meters (984 ft.)
- PIN TESTING: The network cable testers identifies proper, severed, short circuit, and cross connected pins.
- LOCAL & REMOTE TESTING: A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit
- TRANSMITTER INTERFACE: 2 x test ports, Manual test button, Auto test button, Power/tone switch, LED indicators.
- RECEIVER INTERFACE: Test port, LED indicators
- CONTINUOUS SCAN: Continuous scan mode is design to accommodate testing with cable ends in different locations
- MANUAL SCAN: Manual scan is well suited for loop back cable testing
- COMPATIBLE CABLES: Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e, Coax cable, USB and 1394 cable (with TC-NTUF). Not designed for live wires. Connecting tester to a live wire may damage the tester.
- ALSO INCLUDED: 2x RJ-45-to-BNC Adapters, Network Patch Cable, Carry Pouch
TRENDnet's Network Cable Tester, model TC-NT2, is a comprehensive cable tester for network professionals. It accurately checks pin configurations for Ethernet cables, USB cables, BNC cables, and patch panel ports. The TC-NT2 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft.). All components fit into a handy travel case.
PACKAGE CONTENTS
- TC-NT2
- Quick Installation Guide
- 2x RJ-45-to-BNC adapter
- Network patch cable
- Carry pouch
- ALSO INCLUDED: 2x RJ-45-to-BNC Adapters, Network Patch Cable, Carry Pouch
- COMPATIBLE CABLES: Cat 7, 6, 6e, 6a, 5, 5e, 4, 3, 3e, Coax cable, USB and 1394 cable (with TC-NTUF). Not designed for live wires. Connecting tester to a live wire may damage the tester.
- MANUAL SCAN: Manual scan is well suited for loop back cable testing
- CONTINUOUS SCAN: Continuous scan mode is design to accommodate testing with cable ends in different locations
- RECEIVER INTERFACE: Test port, LED indicators
- TRANSMITTER INTERFACE: 2 x test ports, Manual test button, Auto test button, Power/tone switch, LED indicators.
- LOCAL & REMOTE TESTING: A transmitter unit facilitates loop testing and a receiver unit allows for cable testing in locations away from the transmitter unit
- PIN TESTING: The network cable testers identifies proper, severed, short circuit, and cross connected pins.
- CABLE TESTING DISTANCE: Tests over cables lengths of up to 300 meters (984 ft.)
- ACCURATELY CHECK CABLES & PORTS: The comprehensive cable tester for network professionals allows you to accurately check pin configurations for Ethernet cables, USB cables (with TC-NTUF sold separately), BNC cables, and patch panel ports.
TREND Networks SecuriTEST IP – Digital/Analog/HD Coax CCTV Tester
plus Shipping Costs
SecuriTEST IP is an installation and troubleshooting tester for digital/IP, HD coax and analog CCTV camera systems. With a single tester that can power, configure and document, SecuriTEST IP increases productivity from start to finish.
- Connect to various cameras using RJ45, Wi-Fi or BNC ports
- Power the camera with 12V from the Li-Ion battery or PoE/PoE+
- Faster camera login using the unique QuickIP™ function
- Comprehensive camera setup with aim, focus, PTZ, presets and network settings
- Provide proof of installation with PDF reports that show camera parameters and multiple video screen-shots
- Eliminate guess work with data cable and network troubleshooting tools
- Connect to various cameras
- Power the camera with Li-Ion battery or PoE+
- Faster camera login
- Comprehensive camera setup with aim, focus, PTZ
- Provide proof of installation with PDF reports
- Eliminate guess work with troubleshooting tools
NetAlly LinkRunner LRAT-2000 Network Testing Device
plus Shipping Costs
LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
Key features include verifying signal and link integrity at 10/100/1G over copper or fiber, unmatched TruePower PoE testing and loading, 802.1x authentication, cable wiremapping, IPv4/IPv6 readiness , streamlined UI and color display, full documentation of test results with storage for 50 reports, location and identification of cabling runs, and nearest switch information. Includes: LinkRunner AT 2000 tester with Li-ion battery, Wireview Cable ID #1, LinkRunner Manager software CD, USB cable, RJ-45 coupler, getting started guide, and soft carrying case.
- Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest
- Validate up to 30W 802.3af/at PSE with TruePower? loaded Power-over-Ethernet (PoE) test
- Verify twisted-pair cable length and wire-map in a snap
- Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Servic
Fluke Networks Pro3000 Analog Probe
plus Shipping Costs
The Pro3000's ergonomic sleek design is easy to handle and use. The large speaker on the probe makes the tone easier to hear through walls, enclosures, wood or plaster. A recessed on/off button helps prevent the probe from accidentally being turned on in the pouch. It accommodates a headset (sold separately) for use in noisy environments.
Fluke Networks MicroScanner2 Cable Verifier
plus Shipping Costs
Next generation MicroScanner verifies voice/data/video cable and services with a revolutionary user interface.
The MicroScanner2 Cable Verifier presents a revolutionary change in voice, data, and video cable testing. It starts by taking results from what was four different test modes and displaying them all at once graphical wiremap, pair lengths, distance to fault, cable ID, and far end device. What's more, its integrated RJ11, RJ45, and coax test ports support virtually any type of low-voltage cable testing with no need for awkward adapters. The end result is reduced test time and technician error. That makes high-quality installations more efficient than ever.
NetAlly LinkRunner AT 4000 Advanced Network & Cable Tester
plus Shipping Costs
Advanced Copper and Fiber Network Testing, Diagnostics, Discovery, and Mapping
- Provides deep visibility, diagnostics, and packet capture for network technicians and engineers to quickly resolve issues impacting single or multiple devices and network segments.
- Automatically discovers, inventories, and documents network infrastructure devices, endpoints, and connection paths across multiple VLANs and subnets; detects common problems and generates topology maps in Link-Live.
- Comprehensive AutoTest validates and troubleshoots all aspects of network connectivity and services.
- Verifies available link speed from 10Mbps to 10Gbps, tests PoE, identifies connected switch port and VLAN.
Overview
The LinkRunner AT 4000 is an advanced cable and network tester for Multigigabit NBASE-T and fiber Ethernet networks, including comprehensive network discovery and topology mapping with advanced diagnostics and problem detection for in-depth troubleshooting.
Using network discovery and layer 2 and 3 path analysis, the LinkRunner AT 4000 offers comprehensive network visibility to help resolve issues impacting multiple devices - not just a single link - while still providing the automated tests for moves/ adds/changes validation and troubleshooting that the LinkRunner AT family of test solutions is known for.
Test results can be automatically uploaded to the Link-Live collaboration, reporting, and analysis platform to improve teamwork between network engineers and technicians, creating greater job visibility, better project control, and improved tester fleet management. Independent management plane via wired or Wi-Fi connection (with optional adapters) allows remote operation and result uploading separate from the network under test.
Fluke Networks TS22 22801009 Network Testing Device with ABN
plus Shipping Costs
The TS22 Test Set's unique built-in one-way amplified speaker provides three audio levels for hands-free listening and use with automated voice response systems. Multiple memories enable storage of nine 18 digit telephone numbers in repertory dialer (speed dialing) for easy access to test boards, the central office and other frequently called numbers. The last number redial feature eliminates the need to re-key your last entry. The TS22 Test Set offers an unbeatable combination of reliability, durability and expanded utility.
Fluke Networks MicroScanner PoE Cable Verifier
plus Shipping Costs
Microscanner™PoE cuts through the confusion of your PoE installation by providing swift and simple PoE verification.Thetester detects the available PoE class (0-8) in accordance to the latest PoE standards anddisplays the voltage from passive PoE sources. Everything cable technicians need to know, including available services (up to 10G Ethernet), cable length, wiremap, cable ID, and distance to fault are all shown on the LCD screen. Built-in Intellitone digital and analog toning precisely locates virtually any cable or wire pair -even on active networks. The ergonomic design features sleek rubber over mold to enhance grip and ruggedness.
- Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 1 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wiremap, cable ID, and distance to fault, detects POTS
NetAlly WireView Cable IDs #2-6
plus Shipping Costs
Use this handy set of wiremap adapters and cable identifiers #2 - #6 to extend the basic cable test features of the OneTouch AT Network Assistant and LinkRunner AT Network Auto-Tester products. These optional accessories allow you to test your cables for breaks, shorts, etc.
- Accessory for cable testing and office identification
NetAlly Cable Identifier
plus Shipping Costs
The WireView 1 cable identifier is a cable testing and office identification accessory used in conjunction with the NetAlly OneTouch AT Network Assistant or LinkRunner AT Network Auto-Tester. It's utilized for identification of cable runs where the work area outlets are mislabeled or unlabeled. Through this numbered plug, identify wall jack to switch port path.
- For NTS2, ES, ES2 and OPV INA
- Accessory for cable testing and office identification
Fluke Networks Pro3000F Filtered Probe (60 Hz) and Tone Generator Kit
plus Shipping Costs
- Clear - Innovative filter technology blocks interference ("buzz") that makes tracing difficult ("F" models only)
- Precise - SmartTone™ technology provides five distinct tones for exact pair identification
- Sends loud tone up to 10 miles (16 kilometers) on most cables
- Loud speaker on probe makes the tone easier to hear through drywall, wood, and other enclosures
- Angled bed-of-nails clips allow easy access to individual pairs
- RJ-11 connector is ideal for use on telephone jacks
- Attach nylon pouch (included in kit) to your belt for easy transport
The Pro3000F probe utilizes innovative filter technology to obstruct signal interference to make tracing your cable easier, regardless of the work environment. Depending on the region, signal interference may be at 60 Hz, which is most common in North America, or 50 Hz, which is more common in Europe and Asia. For this reason, there are 2 versions of the Pro3000F Filtered Probe. The Pro3000F60, which obstructs 60 Hz signals and its harmonics and the Pro3000F50, which blocks interference at 50 Hz and its harmonics.
Technicians can also switch between filtered and unfiltered modes with a simple push of a button. The probe's loud speaker also allows for use in noisy locations and for tracing cable through drywall, wood and other enclosures. The probe also touts an auto-off feature that deactivates the probe after 5 minutes to conserve battery life.
The Pro3000F Filtered probe becomes even more useful when paired with the the Pro3000 Tone Generator. The Pro3000 Tone Generator allows for direct connection to unterminated wire using the angle bed of nails clips or terminated RJ-type jacks with the male RJ-11 plug. The tone generators strong tone and SmartTone™ technology allows for precise pair identification up to 10 miles (16 km) away.
Pro3000 Analog Tone Generator and SmartTone™
Use the SmartTone™ capability of the Pro3000 Tone Generator to identify the right pair. Simply short the selected pair at the near or far end to change the cadence of the tone generated. The tone change you hear through the probe can help you identify the correct wire pair. SmartTone™ provides five distinct tones for exact pair identification.
Tone Generator features:
- SmartTone™
- Send tone signal up to 10 miles on most cables
- Line cord features angled bed-of-nails clips and a rugged RJ-11 plug for direct access to phone and data jacks without adapters
- External switch allows selection of solid or alternating tone options, indicated with solid or flashing LEDs
- Continuity Testing
- Line polarity confirmation
- Innovative filtered probe obstructs signal of 60 Hz or 50 Hz external interference
- Switch between filtered and unfiltered modes with one button press.
- Tone and trace wire on non-active networks
- Auto-off capability extends battery life
- Loud probe speaker is audible in noisy locations
Manhattan 5-in-1 Cable Tester
plus Shipping Costs
Features:
- Versatile cable tester for five commonly used network and computer cables
- For Cat5/6 network and ISDN connection tests
- USB AB- and IEEE1394 6-pin FireWire cable tester
- Connection test with LED indicators for 8 single lines and screening
- Tests for: Short, Non-Parallel, No Connection
- Quality protective pouch
- Lifetime Warranty
Tripp Lite T014-001 Network Cable Continuity Tester
plus Shipping Costs
- Combines main tester unit and removable remote tester unit
- Tests multiple types: RJ11, RJ45, USB, BNC
- Tests cable lengths up to 600 ft.
- LEDs indicate 9V battery status at a glance
- Includes convenient carrying case
NetAlly LinkRunner LRAT-1000 Network Testing Device
plus Shipping Costs
LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
Key features include verifying signal and link integrity at 10/100/1G over copper or fiber, unmatched TruePower PoE testing and loading, 802.1x authentication, cable wiremapping, IPv4/IPv6 readiness , streamlined UI and color display, full documentation of test results with storage for 50 reports, location and identification of cabling runs, and nearest switch information. Includes: LinkRunner AT 1000 comes with a USB cable, an AC adapter, LinkRunner Manager software CD, a removable AA battery case, four AA batteries, a soft case, and instructions.
- Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest
- Validate up to 30W 802.3af/at PSE with TruePower? loaded Power-over-Ethernet (PoE) test
- Verify twisted-pair cable length and wire-map in a snap
- Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Servic
Tripp Lite N844B-LOOP-12F Fiber Optic Loopback
plus Shipping Costs
The N844B-LOOP-12F is an OM3-rated 50/125 fiber optic loopback cable with an MTP/MPO female connector with a 12-pin configuration (1-12, 2-11, 3-10, 4-9, 5-8, 6-7), allowing testing to be performed on a complete link. With an overall length of approximately 4 inches, the N844B-LOOP-12F is easy to take with you for testing anywhere in the network. An included dust cap protects the connector when not in use.
- Included dust cap protects connector during storage
- 4-inch overall length for on-thego convenience
- Fiber optic loopback tester for 40 GbE QSFP+ optical testing
Tripp Lite Cable Tester Wire Tracker Length Fault Location RJ45 RJ11 BNC USB
plus Shipping Costs
The T010-001-K Multi-Function Cable Tester is an essential tool for cable installers or anyone working in telecom or LAN environments. It allows you to test RJ45 (STP/UTP), RJ11, BNC and USB cable wiring, length, fault and location, as well as common metal wires using the included alligator clip adapter.
For instance, you can test wiring for open, short, cross, reverse and pairing connection. You can also track the location of an open circuit position, and determine the length of a cable - whether in a wall or on a spool - up to 4,920 feet (1,500 meters). The easy-to-read LCD interface includes a calibration function that lets you load saved data.
Powered by included 9-volt batteries, the T010-001-K can find an RJ45, RJ11, BNC or USB cable nestled within a group of cables. The auto-off function preserves battery power. The probe unit's LED flashlight is handy for working in dark areas. Included headphones help you work in noisy areas. When not in use, the T010-001-K can be stored in its carrying case.
- Included headphones for use in noisy areas
- Easy-to-read LCD interface
- Alligator clip adapter for testing common metal wires
- Tests RJ45 (STP/UTP), RJ11, BNC and USB cabling
- Tests for open, short, cross, reverse and pairing connection
C2G LANtest Pro Remote Network Cable Tester with Tone and Probe
plus Shipping Costs
The LANtest Pro is a small hand-held tester that enables the user to quickly read the status of Ethernet twisted pair cables. It tests for faults such as open circuits, shorts, crossed pairs, reversed pairs and split pairs in seconds.
The LANtest Pro includes one master unit and one remote unit easily operated by one person testing patch cords or installed cables. Moreover, the small remote unit is designed to slip into the master unit to prevent loss or damage. The compact design is also very user-friendly and can be conveniently carried to any job site.
Fluke Networks FiberLert Live Fiber Detector
plus Shipping Costs
The easy, pocket-sized fiber troubleshooter
Quickly verify fiber activity, polarity, and connectivity with the FiberLert™ Live Fiber Detector. This pocket-sized tool tests single-mode, multimode, UPC and APC patch cords and ports with a non-contact / non-contaminating detector. The LightBeat™ feature flashes the LED, indicating a powered-on condition and good battery, a timer shuts FiberLert™ off after five minutes of inactivity to extend battery life (2xAAA, included). Rugged design includes a convenient pocket clip and is backed by a two-year warranty.
- Detects optical power in single-mode and multimode fiber wavelengths (near infrared range 850 nm to 1625 nm)
- No setup or interpretation needed - light and sound indicate presence of an optical signal
- "Non contact" detector reduces the risk of contamination and damage
- Suitable for ports and patch cords, SM, MM, UPC and APC connections
- LightBeat™ flashes to indicate operation and battery status; powers off after five minutes of inactivity to preserve battery life (2xAAA, included)
- Two-year warranty
C2G Psiber Pinger Plus Network IP Tester
plus Shipping Costs
The Psiber Pinger is a unique handheld tester used for installing and maintaining computer Local Area Networks (LANs) running the TCP/IP protocol. The Pinger uses the powerful Ping function to verify connectivity, check transmitted and received data integrity, indicate network traffic loading by measuring round trip time, notify duplicate IP address responses, provide the MAC address of an IP address and warn when the default gateway cannot be located. The Pinger also identifies reversed polarity for improperly connected wire pairs and provides a port identification feature with selectable blink rates to identify which port on a hub or switch a wall outlet is connected.
NetAlly CyberScope Cyber Security Scanner (Wireless Only, Full Tri-Band)
plus Shipping Costs
- Endpoint and Network Discovery
- Rogue AP and Client Location
- Network Vulnerability Assessment
- Wireless Security Confirmation
- Segmentation & Provisioning Validation
- AirMapper™ Wireless Site Surveys
Overview
Complete visibility. It's what you need but despite all the resources you have, there are still critical gaps. Today's dynamic and accessible edge networks, with their proliferation of endpoints (IT/OT/IoT) and increasing Wi-Fi use cases are often beyond the sight of central platforms.
CyberScope Air offers unique and comprehensive network security assessment, analysis and reporting from a single, powerful, portable tool:
- Easily validates controls at the edge
- Inventories everything, including all wireless IoT, OT, and unmanaged devices
- Quickly tests and demonstrates policy compliance
- Enables collaboration and sharing between teams
As a ruggedized, purpose-built all-in-one tool, CyberScope Air is a network security and testing solution that eliminates the use of fragile laptops and tablets. With multiple functions, it provides fast, actionable insights on-prem into your edge networks, filling the critical visibility gaps that other cybersecurity and testing tools may not address.
Security Assessments Simplified
Security practitioners and network engineers can useCyberScope Air to quickly identify every Wi-Fi and BT/BLE device on your edge network, pinpoint exactly where it is connected, and instantly determine if it is friend or foe.CyberScope Integrates Nmap
Nmap technology is fully integrated in CyberScope Air with a simplified user interface making scan execution easy for beginners while providing advanced features for experienced users, helping reduce the risk of successful attacks. Nmap endpoint audits can be executed as part of network discovery against every device, as targeted probes using CyberScope Air's AutoTest, or run as needed with built-in or custom scripts.
- Wi-Fi security validation - Supports Wi-Fi 2.4, 5 and 6 GHz bands, offers numerous advanced cybersecurity capabilities to test for presence and use of wireless attributes (WiFi PMF/Personal/Client Isolation, mDNS/ ZeroConf, and beaconing).
- Full wireless visibility - Contains all the wireless testing, troubleshooting, and surveying features present in the AirCheckTM G3 Pro.
- Wireless discovery with integrated vulnerability scanning - Quickly inventory WiFi and Bluetooth/BLE infrastructure/IoT/OT/ICS devices, locate rogue assets, scan for vulnerabilities with integrated Nmap technology, and compare against baselines.
- Integration of Nmap with AutoTest - Perform automated tests to validate infrastructure hardening including SNMP, HTTPS, SSH, management VLAN, and network segments and scan for vulnerabilities.
- Automated discovery monitoring - Generate baselines, upload ongoing snapshots to Link-Live™ for fast detection of new/missing/transitory or infrastructure device/network changes.
- Link-Live collaboration, reporting, and analytics platform - Maximize team efficiencies, enhance assessments/audits, improve WiFi cybersecurity posture with the combination of CyberScope and Link-Live.
NetAlly LinkRunner AT 2000 Extended Test Kit
plus Shipping Costs
LinkRunner AT Network Auto-Tester is the fastest way to solve network connectivity problems. This rugged, handheld network tester takes the guesswork out of troubleshooting with its complete one-button AutoTest. AutoTest performs your required set of connectivity tests in 10 seconds, enabling you to accurately and quickly identify and solve network problems.
Key features include verifying signal and link integrity at 10/100/1G over copper or fiber, unmatched TruePower PoE testing and loading, 802.1x authentication, cable wiremapping, IPv4/IPv6 readiness , streamlined UI and color display, full documentation of test results with storage for 50 reports, location and identification of cabling runs, and nearest switch information. LinkRunner AT 2000 Extended Test Kit includes: LinkRunner AT 2000, IntelliTone Pro 200 Probe, WireView Cable IDs #1-6, LinkRunner Manager software CD, test accessory soft pouch, USB cable, LinkRunner AT Getting Started Guide, IntelliTone Pro Getting Started Guide, one 9V alkaline battery, packaged in a deluxe carrying case.
- Discover nearest switch name and port information via CDP/LLDP/EDP and verify link speed/duplex and connectivity to TCP/IP network with AutoTest
- Validate up to 30W 802.3af/at PSE with TruePower? loaded Power-over-Ethernet (PoE) test
- Verify twisted-pair cable length and wire-map in a snap
- Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Servic
- Extended testing capabilities with WireView cable identifiers #2 - #6 and an IntelliTone 200 Probe included in the kit