StarTech.com 92x25mm Dual Ball Bearing Computer Case Fan w/ LP4 Connector – 2200 rpm – Plastic Fan Enclosure

$33.67

plus Shipping Costs

This 9.2cm x 9.2cm x 2.5cm (3 5/8"" x 3 5/8"" x 1"") Dual Ball Bearing PC case fan is an add-in cooling fan designed to fit most computers.

The PC Case fan can be used to circulate cool air into the case or exhaust warm air out, preventing problems due to overheating components.

A quiet running brushless ball bearing DC motor coupled with a high efficiency blade design is capable of moving 39.35 CFM (cubic feet per minute) of air.

Power is supplied to the fan using a standard LP4 (hard drive power connector) pass through plug.

More from the Manufacturer


  • Inline LP4 power connectors
  • 92mm dual ball bearing fan design

QNAP ES NAS Series Fan Module

$171.42

plus Shipping Costs

  • Fan blades are equipped in a durable case ensuring a safe operation
  • The competent Cooling Module fan(s) is specially designed for standard servers

HPE Cooling Fan

$209.00

plus Shipping Costs

  • The flawless rotation of fan blades is just what you need for prolonged cooling
  • The competent cooling system is specially designed for standard servers

StarTech.com 90x25mm High Air Flow Dual Ball Bearing PC Case Fan

$51.24

plus Shipping Costs

This 9.25cm x 9.25cm x 25mm (2600 RPM) computer case fan helps prevent computer systems from overheating, thereby increasing efficiency and stability.

Featuring a TX3 motherboard connection, the FAN9X25TX3H is a high-performance way to avoid overheating and system failure.

More from the Manufacturer


  • Higher speed 2600 RPM operation
  • Dual ball bearing design
  • 3-pin connector with tachometer wire

Cisco N2K/3K Individual Fan, Reversed Airflow (Port Side Intake)

$188.05

plus Shipping Costs

  • Well designed blades and shroud let the air flow over a greater area to enable effective cooling
  • Fully compatible with demanding network switches

Cisco Cooling Fan

$753.75

plus Shipping Costs

  • Well designed blades and shroud let the air flow over a greater area to enable effective cooling
  • The competent cooling system is specially designed for demanding network switches

Supermicro Heat Sink With Retention Back Plane Assembled OnBoard

$42.32

plus Shipping Costs

Supermicro Heat Sink With Retention Back Plane Assembled OnBoard - Motherboard

Thermaltake TH280 V2 ARGB Sync All-In-One Liquid Cooler

$156.45

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 ARGB Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB, and two 140mm fan models, including TH 280/ 420 V2 ARGB.

New Version, New Design

TH V2 ARGB was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses two CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.


  • Cooling Fan/Radiator/Water Block/Pump offers better protection with maximum cooling/heating efficiency and convenience
  • Hydraulic Bearing fan bearing type for maximum cooling/heating usability with added feasibility
  • ARGB LEDs illumination for a modish look
  • The competent cooling system is specially designed for standard processors

Corsair iCUE SP120 RGB Elite Performance 120mm PWM Fan – Single Pack – 1 Pack

$55.18

plus Shipping Costs

The CORSAIR iCUE SP120 RGB ELITE Performance Fan boasts eight bright, individually addressable RGB LEDs, adding to the vivid RGB lighting in your SP RGB ELITE-cooled system.

CORSAIR PC CASE FANS | iCUE SP RGB ELITE SERIES

YOUR GUIDING LIGHT TO GREAT COOLING

CORSAIR AIRGUIDE TECHNOLOGY

SP RGB Elite series fans utilize anti-vortex vanes to direct airflow and concentrate cooling, improving cooling whether used as intake, exhaust, or mounted to a liquid cooling radiator or heatsink.

MESMERIZING RGB LIGHTING

Eight Individually Addressable RGB LEDs line the central fan hub and diffuse outwards through the semi-opaque fan blades for a subtle and elegant glowing effect.

YOUR SETUP AT YOUR COMMAND

With the included iCUE Lighting Node CORE you can create vivid lighting effects, bringing your system to life with dynamic RGB lighting using our powerful iCUE software.

LOW-NOISE, HIGH-PERFORMANCE

With noise levels as low as 7 dBA, the SP RGB ELITE's translucent fan blades provide ample airflow while still letting your RGB lighting shine through.


  • Well designed blades and shroud allow the air to flow at 357 gal/min over the entire surface to enable effective cooling
  • Features hydraulic bearing to improve longevity, silence, and stability
  • RGB LEDs illumination for a modish look
  • Cooling Fan fan(s) helps the compatible cases by maintaining a great balance of performance and efficiency

StarTech.com 80x25mm Dual Ball Bearing Computer Case Fan w/ TX3 Connector

$41.42

plus Shipping Costs

This versatile PC case fan measures 8cm x 8cm x 2.5cm (3 1/8"" x 3 1/8"" x 1""), designed to fit a broad range of computer case designs, helping to improve internal airflow within the computer case by circulating cool air into the case or exhausting warm air away from the computer.

A quiet cooling solution, the 8cm dual ball-bearing fan features a high-efficiency blade design that's capable of moving 32 CFM throughout the computer case.

This broadly compatible PC cooling solution can be powered through a simple TX3 (3-pin) connection to the computer power supply and is backed by StarTech.com's 2-year warranty.

More from the Manufacturer


  • Dual ball bearing design
  • 3-pin TX3 power connector

StarTech.com Replacement 70mm Ball Bearing CPU Case Fan – TX3 Connector – Case fan – 70 mm – black

$19.99

plus Shipping Costs

Add additional chassis cooling with a 70mm ball bearing fan. This versatile 70mm fan is an ideal replacement fan for keeping your computer running cool. The fan can be powered through a TX3 connection, and features a dual ball bearing design that ensures reliable cooling and longer fan lifespan.

The fan can be used to replace the fan component of some CPU coolers or mounted to the side panel of a computer case and features a tachometer pin on the TX3 motherboard connector that provides the host system with fan operating status information.

More from the Manufacturer


  • Dual ball bearing design
  • 3-pin connector with tachometer wire

XPG LEVANTE X 240 All-in-One CPU Liquid Cooler

$174.57

plus Shipping Costs

An All-In-One CPU Liquid Cooler with industry-leading engineering from Asetek, XPG LEVANTE X provides excellent CPU heat management. This reliable, high performance Liquid Cooling solution ensures smooth system operation for an optimal gameplay experience.

  • INFINITE MIRROR PUMP DESIGN
  • LATEST INTEL & AMD PLATFORM SUPPORT
  • EFFICIENT PWM DESIGN
  • Asetek 7th Gen PATENTED CPU COOLING SOLUTION
  • Extreme Performance CPU Cooler
  • Smooth RGB lighting effect

  • Reliable High-Performance CPU Liquid Cooler with Asetek Cooling Solution.
  • High-Performance pump efficiently dissipates heat from high-end CPUs.
  • High-Performance, low noise Dual-Ring 120mm ARGB Fans.
  • Universal design for fan & pump RPM control supports all MB brands.
  • All-in-One hassle-free installation; no additional setup required.
  • Fluid Dynamic Bearing (FDB) Fans with 4-Pin PWM design.

Cisco Cooling Fan

$196.69

plus Shipping Costs

  • Heavy-duty fan shroud ensures safe operation
  • Helps the compatible network switch by maintaining a great balance of performance and efficiency

MSI MPG CORELIQUID D240 Cooling Fan/Radiator/Water Block/Pump

$240.32

plus Shipping Costs

BE AHEAD, POP YOUR STYLE

The MPG series brings out fashionable products by showing extremely unique styles and expressing a conceited attitude towards the challenge of the gaming world. With extraordinary performance and style, the MPG series defines the future of gaming fashion.

UNRIVALED RAPID COOLING

MSI's exclusive TORX FAN 4.0 provides concentrated airflow to the radiator for the most rapid heat dissipation.

TORX FAN 4.0

Inspired by teamwork, MSI's exclusive TORX FAN 4.0 has two fan blades working as one with an outer ring design.

CONCENTRATED COOLING PERFORMANCE

A 60mm fan is placed within the water block to help dissipate heat for the M.2 SSD, CPU VRMs, and surrounding components.

2.4" CUSTOMIZABLE IPS DISPLAY

The MPG CORELIQUID D Series comes with a 2.4" IPS display capable of displaying hardware information, GIF, MP4, photos, texts, and live weather information.

EVAPORATION PROOF TUBING

MPG CORELIQUID D Series' tubing is constructed with three layers of netted plastic with a reinforced mesh exterior.

MYSTIC LIGHT COMPATIBLE

Show off your colors with full ARGB customization on the fans and cooling block.

CONTROL IN YOUR HANDS

Through MSI's exclusive software, you can independently control all of the fans' speed according to your preference for cooling or for silence.

TOTAL CONTROL IN YOUR HANDS

Everything ranging from MPG CORELIQUID D Series' fan speed to the ARGB lighting to the IPS display can be adjusted through the MSI Center.


  • MSI's TORX FAN 4.0 provides supreme cooling to the radiator.
  • 60 mm TORX FAN 3.0 within the water block provides heat dissipation to the power solutions.
  • 2.4" Customizable IPS display: hardware monitor, video & image upload, system clock and live weather.
  • The fan and pump speed can be independently controlled according to different user scenarios.
  • Latest CPU socket supported: Intel LGA 1700 & AMD AM5.
  • A three-layer mesh plastic tube slows down the evaporation speed of water cooling liquid.

Asus ROG Ryujin III 360 ARGB Cooling Fan/Radiator/Water Block/Pump

$435.41

plus Shipping Costs

COOLER THAN COOL

Go cooler than cool with the Ryujin III. An expansive 3.5-inch LCD screen displays live system stats, animated GIFs, or even your own custom artwork. Underneath, a new 8th Gen Asetek pump quietly, paired with larger coolant tubes, keeps the latest processors from Intel and AMD cool, while an embedded Axial-tech fan helps control motherboard VRM temps. And the coolant within flows through a higher capacity radiator graced with three ROG 120 mm ARGB fans that utilize magnets to make installation a snap.

Magnetic Daisy-Chainable Fans

The customizable ARGB fans snap together with a magnetic connector that links the fans and transmits control signals and power. Only one cable is required for all three fans, making installation and cable management a breeze.

Full Color 3.5" LCD Display

Internal memory has also been doubled to support clearer default animations and longer videos.

System Monitoring

The industry-leading 3.5-inch LCD built into the pump block delivers instant monitoring of clock frequencies, voltages, temperatures, fan speeds and water flow, or your custom GIFs.

Personalized Animation

Choose a pre-designed animation from the ROG gallery, or easily add one of your own.

Custom Wallpaper

Do you prefer banners or clan logos? Choose one designed by ROG, or put your own text or JPEG file on proud display at the heart of your rig.

Exploded View

The 8th Gen Asetek pump sports a 3-phase motor for higher flow and quieter operation, riding on a larger cold plate ideally sized for the latest Intel and AMD processors.

Cool Upgrades | New Cold Plate

The contact surface is now 32% larger to keep the chill on power hungry processors.

Enhanced Tubing

The sleeved rubber is wrapped in braided mesh, and the inner diameter has been enlarged from 5 mm to 7 mm to reduce flow resistance.

Thicker Radiator

399.5mm x 120mm x 30mm radiator - 3mm thicker than previous gen, for improved cooling performance.

Embedded VRM Fan

A larger embedded Axial-tech fan improves airflow, reducing motherboard VRM temperatures by up to 35 Celsius.

Software Personalization | Fan Control

This generation of ROG all-in-one coolers now includes software that lets you control the speeds of your pump and embedded fan, in a way that should be instantly recognizable to FanXpert veterans.

AIDA64 Extreme

The ROG Ryujin III ARGB also comes with a one-year subscription to AIDA 64 Extreme, whose data can be fed live onto the cooler's LCD screen to get even more info on the state of your system.

EXTENSIVE COMPATIBILITY

The ROG Ryujin III series features 400 mm of tubing and is compatible with a wide range of Intel® and AMD motherboard platforms, giving you ample processor and build flexibility.


  • Cooling Fan/Radiator/Water Block/Pump is the single answer to all your desired and heavy-duty cooling/heating needs
  • ARGB LEDs add vibrant colors to the fan
  • Fully compatible with standard processors

Corsair iCUE H100i RGB ELITE Liquid CPU Cooler – 2 Pack

$194.23

plus Shipping Costs

iCUE H100i RGB ELITE | LIQUID CPU COOLER | NEW CHAMPION OF COOLING | Refined Pump Head Design | DYNAMIC LIGHTING AND STYLE

With 16 RGB LEDs on a modern pump head design, the ELITE series deliver great cooling with the looks to match.

Produce stunning, customizable lighting effects using CORSAIR iCUE software to add vivid colors and style to your system.

Switch through various profiles.

iCUE Software | YOUR SETUP AT YOUR COMMAND

Adjust fan and pump speeds, control and synchronize your cooler's RGB lighting with all iCUE-compatible devices, and monitor CPU and coolant temperatures, all from a single intuitive interface.

AF ELITE Series Fans | Outperform The Competition

Elevate your CPU performance with all-in-one liquid cooling driven by CORSAIR AF ELITE Series fans with AirGuide technology.

QUIET OPERATION | Specialized Cooling Modes

Zero RPM and Variable Pump Speed specialized cooling modes in iCUE keep noise to a minimum when your system is idle or under light loads.

Efficient Heat Transfer | High-Performance Pump and Cold Plate

Equipped with a thermally optimized copper cold plate and pre-applied thermal compound, the low-noise pump design delivers high-performance, quiet cooling.

Modular and Widely Compatible | Effortless Installation

With tool-free mounting bracket, convenient USB Type-C port connection, and wide compatibility for the latest Intel® and AMD motherboard sockets, the Elite Series AIO coolers are designed for a quick and painless installation.

Unite your setup

CORSAIR iCUE software brings your entire setup together, creating a fully immersive ecosystem with intuitive control.


  • RGB LEDs add vibrant colors to the fan
  • Cooling Fan/Radiator/Pump fan(s) is fully compatible with standard processors

Thermaltake Contac Silent 12 CPU Cooler

$63.27

plus Shipping Costs

Thermaltake Contac Silent 12 is a budget CPU cooler with excellent cooling performance, featuring a 120mm PWM controlled fan, high airflow fan blades, long life hydraulic bearing, low-noise operation as well as non-interference cooling design. The Contac Silent 12 supports all the latest Intel and AMD CPU socket.

High Airflow Fan Blade Design

The fan blades are engineered to achieve the optimal cooling performance and generate large volume of air passing through the heatsink at any angle.

Long Life Hydraulic Bearing for Reliable and Silent Operation

The hydraulic bearing self-lubricates with a high quality, friction-reducing substance that lowers operation noise and enhance thermal efficiency. The seal cap prevents leakage of the lubricant and improves the lifespan of the unit.

Superior Heat Dissipation

Optimized 0.4mm thickness aluminum fins with 2.2mm air gap, and 4 x �6mm solid copper heat-pipes are designed for rapid heat dissipation, allowing maximum heat conductivity. The tower's side flow design delivers the best cooling performance. In addition, the heat-pipes are in continuous direct Contac with the CPU to ensure fast and efficient heat dissipation.

Optimized Silent Operation

The Contac Silent 12 comes with a LNC (Low-Noise Cable) that can reduce 24% of noise level and 27% of fan speed.

Special-Designed Fan Clips

The fan clips allows the fan and the cooler to combine tightly. Also, the clips make assembly and dismantling more easily in process.

Non-Interference Cooling Design

The new Contac Silent 12 solves the co-existing problem of high performance RAM and CPU coolers, achieving the best RAM clearance.

Universal Socket Compatibility

All-in-one back-plate design offers universal Intel and AMD socket compatibility.


  • Well designed blades and shroud allow the air to flow at 556 gal/min over the entire surface to enable effective cooling
  • Features hydraulic bearing to improve longevity, silence, and stability
  • Cooling Fan/Heatsink fan(s) is fully compatible with Socket B LGA-1366 processors

Thermaltake TH420 V2 Ultra ARGB Sync All-In-One Liquid Cooler

$249.92

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses three CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.


  • Cooling Fan/Radiator/Water Block/Pump offers enhanced cooling/heating with maximum productivity
  • ARGB LEDs illumination for a modish look
  • Helps the compatible processors by maintaining a great balance of performance and efficiency

Cisco Cooling Fan

$483.91

plus Shipping Costs

Cisco ncs 5001 router fan back to front airflow

Middle Atlantic Cabinet Cooler, 40 CFM

$341.00

plus Shipping Costs

Cabinet cooler removes heat generated by components located in smaller cabinets, credenzas, lecterns, and entertainment centers. Thermostatically controlled to operate only when needed to extend fan life and minimize dust, this quiet-cooling device features an aesthetically designed vent that can be painted to match its environment.


  • Well designed blades and shroud let the air flow over a greater area to enable effective cooling
  • Helps the compatible cabinets by maintaining a great balance of performance and efficiency

Thermaltake TH240 V2 ARGB Sync All-In-One Liquid Cooler – Snow Edition

$133.40

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 ARGB Snow Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB Snow, and two 140mm fan models, including TH 280/ 420 V2 ARGB Snow.

New Version, New Design

TH V2 ARGB Snow was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB White Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build! The CT120 ARGB White provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

ith CT120 ARGB Fans

Utilizing the CT120 ARGB White Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build! The CT120 ARGB White provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Snow Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one PWM cable and one ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

More from the Manufacturer


  • Cooling Fan/Radiator/Water Block/Pump offers enhanced cooling/heating with maximum productivity
  • ARGB LEDs illumination for a modish look
  • 4.72" fan(s) is fully compatible with standard cpus

Thermaltake TOUGHAIR 110 CPU Cooler

$67.87

plus Shipping Costs

A top flow designed CPU cooler equipped with an optimized 120 mm high static pressure fan and a newly designed heat sink, which guarantees its outstanding performance.

Top-flow design

TOUGHAIR 110 is a 114 mm tall top-flow air cooler that supports up to 140 W. The top-flow design is also beneficial in cooling other components on the motherboard while cooling the CPU.

Enhanced 120 mm high static pressure Fan

TOUGHAIR series utilizes high static pressure fans, which leverages the TOUGHFAN 12 design and boosts the fan speed to 2000 RPM, providing a new level of cooling performance to our CPU cooler.

Asymmetric Fin Structure

The fin is designed with an asymmetric structure that allows larger air intake through the fins. This design lowers the air turbulence and straightens out the airflow making it easier to disperse heat from the fins, delivering superb cooling performance.

High-Performance copper heat pipes

4 x �6 mm heat pipes directly touch the CPU and thermal paste, providing direct and outstanding heat dissipation to the CPU.

Universal Compatibility

TOUGHAIR Series is designed to fit Intel and AMD sockets, including the following models:

Intel LGA 1200/1156/1155/1151/1150
AMD AM4/AM3+/AM3/AM2+/AM2/FM2/FM1


  • The flawless rotation of up to 2000 rpm is just what you need for prolonged cooling
  • Cooling Fan/Heatsink fan(s) helps the compatible Socket LGA-1700 processors by maintaining a great balance of performance and efficiency

Cooler Master MasterLiquid 360L Core White

$133.80

plus Shipping Costs

Cooler Master is building upon the success of the MasterLiquid Lite Series with a redesigned and improved release of the MasterLiquid 360L Core White Edition. Featuring the new dual chamber Gen S, water flow and pressure have been enhanced in combination with the new customized copper base to precisely target heat spots. The radiator surface area is larger than before for improved cooling performance. The 360L Core comes with newly designed 120mm ARGB fans tuned to dissipate heat even more efficiently. The included thermal paste has been upgraded to our premium CryoFuze thermal paste for even better heat conductivity. The new MasterLiquid L Core is the representation of Cooler Master's continuous improvement and innovation.

New Dual Chamber Gen S

Water flow and pressure have been enhanced in combination with the new customized copper base to precisely target heat spots.

Large Surface Area

Increased surface area of the radiator fins improve heat dissipation.

Classic Design Tone

New design elements refresh the aesthetics for a classic minimalist look.

CryoFuze Thermal Paste

Included premium CryoFuze thermal paste for even better heat conductivity.

New 120 ARGB Fan

Newly designed ARGB fans for optimal radiator performance.


  • Cooling Fan/Radiator/Pump is the single answer to all your desired and heavy-duty cooling/heating needs
  • Rifle Bearing fan bearing type for maximum cooling/heating efficiency with added dependability
  • Colorful argb LEDs add an ultra-modern style
  • Fully compatible with standard processors

Thermaltake TOUGHAIR 310 CPU Cooler

$74.40

plus Shipping Costs

A single tower designed CPU cooler equipped with an optimized 120 mm high static pressure fan and newly designed heat sink, which guarantees its outstanding performance.

Single Tower Dual Fan Design

TOUGHAIR 310 is a single tower designed air cooler with 4 heat pipes running through the fins, the U-shape heat pipes increase heat circulation creating better heat dissipation in your system and supports up to 170W.

Enhanced 120 mm high static pressure Fan

TOUGHAIR series utilizes high static pressure fans, which leverages the TOUGHFAN 12 design and boosts the fan speed to 2000 RPM, providing a new level of cooling performance to our CPU cooler.

Asymmetric Fin Structure

The fin is designed with an asymmetric structure that allows larger air intake through the fins. This design lowers the air turbulence and straightens out the airflow making it easier to disperse heat from the fins, delivering superb cooling performance.

High-Performance U-shape copper heat pipes

4 x �6 mm heat pipes directly touch the CPU and thermal paste. The U-shape design creates perfect circulation for better CPU cooling performance.

Universal Compatibility

TOUGHAIR Series are designed to fit Intel and AMD sockets including the following models:

Intel LGA 1200/1156/1155/1151/1150
AMD AM4/AM3+/AM3/AM2+/AM2/FM2/FM1


  • Well designed blades and shroud allow the air to flow at 436.5 gal/min over the entire surface to enable effective cooling
  • Cooling Fan/Heatsink fan(s) is fully compatible with Socket LGA-1700 processors

Asus Ryuo III 240 ARGB Cooling Fan/Radiator/Water Block/Pump

$207.30

plus Shipping Costs

RYUO III 240 ARGB

Gloriously tame the thermals of your high-performance rig with the ROG Ryuo III 240 ARGB. Its premium shell frames an AniMe Matrix display that can be customized to uniquely express your allegiance. Encased deeper within is an 8th Gen Asetek pump that spins coolant through a higher capacity radiator chilled by 120mm ROG ARGB fans, giving your CPU the headroom to flex through everything.

PERFORMANCE | Enhanced Pump Design

The 8th Gen Asetek pump sports a 3-phase motor for higher flow and quieter operation, riding on a larger coldplate ideally sized for the latest Intel and AMD processors.

ROG AF 12S ARGB Fan

A balance of static pressure, high airflow, and low noise ensures optimal cooling performance for all types of workloads. And customizable ARGB illumination adds a visual spin that's uniquely you.

Radiator

Coolant is passed to a high-volume radiator that for every 100 watts of load delivers 2 Celsius lower temperature than the last-gen design.

ANIME MATRIXTM LED PERSONALIZATION | ROG Exclusive Animation

Ten exclusive ROG animations are available for you to cast through the Matrix screen. Select your favorite and customize the sequence or use the Pixel Editor to create your own!

System Monitoring

Install Armory Crate and display your choice of system temperatures, voltages, and fan speeds from the beating heart of your rig.

Aura Sync

Customize the color and effects displayed on the ARGB fans and AniMe Matrix screen, and then synchronize with a vast range of Aura compatible system components to create a unified theme throughout your build.

Pixel Editor

Create your own images and text using the Armory Crate Pixel Editor, then upload to add a dash of unique personality to your rig.

EXTENSIVE COMPATIBILITY

The ROG Ryuo III series features 400mm of tubing and is compatible with a wide range of Intel® and AMD motherboard platforms, giving you ample processor and build flexibility.

More from the Manufacturer


  • The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance
  • The ASUS-exclusive Anime Matrixâ„¢ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations
  • Premium ROG ARGB fans offer high airflow and optimized noise levels
  • Aluminum components and vacuum coating provide high durability and flagship aesthetics
  • The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build

Cooler Master Hyper 212 Spectrum V3 – 1 Pack

$58.89

plus Shipping Costs

Cooler Master is releasing the Hyper 212 Spectrum V3, a redesigned addition to its popular 212 Spectrum predecessor. The 4 heat pipe array has been treated with silver nickel plating for unhindered heat conductivity as well as matching aesthetics. The cooler height is set at 152mm, allowing for a wide range of compatibility in most chassis without sacrificing cooling. The installation brackets give you the versatility for the latest platforms on market.

Spectrum ARGB Fan

120mm Spectrum ARGB fan certified for compatibility with Asus Aura, ASRock RGB, GIGABYTE and MSI RGB Motherboards. (Controller not included)

Wide Range Compatibility

Compact 152mm height designed for wide chassis compatibility without sacrificing performance

Nickel Plated Heat Pipes

4 heat pipes with silver nickel plated finish provide exceptional cooling and aesthetics

Upgraded Installation Brackets

Redesigned brackets simplify installation on the latest available platforms

Direct Contact Technology

Direct Contact Technology maximizes contact surface area and heat exchange


  • Spectrum 120 ARGB Fan - 120mm Spectrum ARGB fan compatible with Asus Aura, ASRock RGB, GIGABYTE and MSI RGB Motherboards.
  • Upgraded Installation Brackets - Redesigned brackets simplify installation on the latest available platforms.
  • Nickel Plated Heat Pipes - 4 heat pipes with silver nickel plated finish provide exceptional cooling and aesthetics.
  • Wide Range Compatibility - Compact 152mm height designed for wide chassis compatibility without sacrificing performance.
  • Direct Contact Technology - Direct Contact Technology maximizes contact surface area and heat exchange.

Thermaltake TH360 V2 ARGB Sync All-In-One Liquid Cooler

$166.20

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 ARGB Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB, and two 140mm fan models, including TH 280/ 420 V2 ARGB.

New Version, New Design

TH V2 ARGB was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cables, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.


  • Cooling Fan/Radiator/Water Block/Pump offers better protection with maximum cooling/heating efficiency and convenience
  • Hydraulic Bearing fan bearing type for maximum cooling/heating usability with added feasibility
  • Colorful argb LEDs add an ultra-modern style
  • The competent cooling system is specially designed for standard processors

Cooler Master SickleFlow 80

$40.14

plus Shipping Costs

Optimized Flow and Pressure

Continuing the SickleFlow 120 series , Cooler Master introduces a new models with brand new upgraded design features for enhanced performance.

The new SickleFlow 80 fan blades are created with bigger blades and increased curvature to optimize the air flow and air pressure performance. Strengthen structural frame design with added rib housing for durability. Improved dustproof and oil leakage prevention for beater life expectancy

FEATURES

New Air Balance Blade - Optimized fan blade design with increased curvature that improves air flow and air pressure.

Improved Frame Durability - Enhanced square frame structure with added rib-support for reducing turbulent flow, noise and increasing overall work efficiency.

New Bearing Sealant - Two-tier sealing mechanism designed to improve dustproof capabilities and prevent lubricant oil leakage for extended life span and performance.


  • The flawless rotation of fan blades is just what you need for prolonged cooling
  • Features rifle bearing to improve longevity, silence, and stability
  • The competent cooling system is specially designed for standard computer cases

Asus ROG Ryuo III 360 ARGB Cooling Fan/Radiator/Water Block/Pump

$362.99

plus Shipping Costs

RYUO III 360 ARGB

Gloriously tame the thermals of your high-performance rig with the ROG Ryuo III 360 ARGB. Its premium shell frames an AniMe Matrix display that can be customized to uniquely express your allegiance. Encased deeper within is an 8th Gen Asetek pump that spins coolant through a higher capacity radiator chilled by 120mm ROG ARGB fans, giving your CPU the headroom to flex through everything.

PERFORMANCE | Enhanced Pump Design

The 8th Gen Asetek pump sports a 3-phase motor for higher flow and quieter operation, riding on a larger coldplate ideally sized for the latest Intel and AMD processors.

ROG AF 12S ARGB Fan

A balance of static pressure, high airflow, and low noise ensures optimal cooling performance for all types of workloads. And customizable ARGB illumination adds a visual spin that's uniquely you.

Radiator

Coolant is passed to a high-volume radiator that for every 100 watts of load delivers 2 Celsius lower temperature than the last-gen design.

ANIME MATRIXTM LED PERSONALIZATION | ROG Exclusive Animation

Ten exclusive ROG animations are available for you to cast through the Matrix screen. Select your favorite and customize the sequence or use the Pixel Editor to create your own!

System Monitoring

Install Armory Crate and display your choice of system temperatures, voltages, and fan speeds from the beating heart of your rig.

Aura Sync

Customize the color and effects displayed on the ARGB fans and AniMe Matrix screen, and then synchronize with a vast range of Aura compatible system components to create a unified theme throughout your build.

Pixel Editor

Create your own images and text using the Armory Crate Pixel Editor, then upload to add a dash of unique personality to your rig.

EXTENSIVE COMPATIBILITY

The ROG Ryuo III series features 400mm of tubing and is compatible with a wide range of Intel® and AMD motherboard platforms, giving you ample processor and build flexibility.

More from the Manufacturer


  • The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance
  • The ASUS-exclusive Anime Matrixâ„¢ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations
  • Premium ROG ARGB fans offer high airflow and optimized noise levels
  • Aluminum components and vacuum coating provide high durability and flagship aesthetics
  • The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build

Thermaltake TH120 V2 ARGB Sync All-In-One Liquid Cooler

$120.01

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 ARGB Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB, and two 140mm fan models, including TH 280/ 420 V2 ARGB.

New Version, New Design

TH V2 ARGB was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.


  • Cooling Fan/Radiator/Water Block/Pump offers enhanced cooling/heating with maximum productivity
  • Hydraulic Bearing fan bearing type for maximum cooling/heating efficiency with added dependability
  • Colorful argb LEDs add an ultra-modern style
  • The competent cooling system is specially designed for standard processors

Thermaltake TH360 V2 Ultra ARGB Sync All-In-One Liquid Cooler – Snow Edition

$238.09

plus Shipping Costs

The TH V2 Ultra ARGB Snow Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB Snow, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB Snow.

New Design, Same Quality

TH V2 Ultra ARGB Snow was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB White Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build! The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one PWM cable and one ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.


  • Cooling Fan/Radiator/Water Block/Pump offers enhanced cooling/heating with maximum productivity
  • ARGB LEDs add vibrant colors to the fan
  • Helps the compatible cpus by maintaining a great balance of performance and efficiency

Thermaltake TH240 V2 Ultra ARGB Sync All-In-One Liquid Cooler

$186.38

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB Fans on this model, not only you can match up some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.


  • Cooling Fan/Radiator/Water Block/Pump is the single answer to all your desired and heavy-duty cooling/heating needs
  • ARGB LEDs add vibrant colors to the fan
  • 4.72" fan(s) helps the compatible chassiss by maintaining a great balance of performance and efficiency

Thermaltake TH280 V2 Ultra ARGB Sync All-In-One Liquid Cooler

$214.56

plus Shipping Costs

No matter the build, We've got you covered

The TH V2 Ultra ARGB Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT140 ARGB Fans

Developed from the CT fan series, this model uses two CT140 ARGB fans with enhanced fan speed, and you can also match with some of our chassis' pre-installed fans to unify your fans in your build!

These fans have 1800 RPM and provide an 84.32 CFM airflow with 3.02 mm-H2O static pressure while maintaining 34.7 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one 900mm PWM cables and one 900mm ARGB cables for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.


  • Cooling Fan/Radiator/Water Block/Pump offers better protection with maximum cooling/heating efficiency and convenience
  • Colorful argb LEDs add an ultra-modern style
  • Fully compatible with standard processors

Thermaltake TH360 V2 ARGB Sync All-In-One Liquid Cooler – Snow Edition

$166.26

plus Shipping Costs

matter the build, We've got you covered

The TH V2 ARGB Snow Series is now ready for all types of builds; the series has three 120mm fan models, including the TH 120/ 240/ 360 V2 ARGB Snow, and two 140mm fan models, including TH 280/ 420 V2 ARGB Snow.

New Version, New Design

TH V2 ARGB Snow was given an industrial look to freshen up the 360-degree rotational cap. Adding Infinity Mirror Lighting to this series can bring more diverse visual effects to the build and gives more depth than it looks.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB Fans on this model, not only you can match up to some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise level.

Enhanced Cooling Surface With A Compact Design

The TH V2 ARGB Snow Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one PWM cable and one ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.

Sync with Motherboard RGB Software

Designed to synchronize with ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, and ASRock Polychrome. It supports motherboards with a 5V addressable RGB header, allowing you to control the lights directly from the software mentioned above without installing any extra lighting software or controllers. For more details, please visit ASUS, GIGABYTE, MSI, and ASRock official websites.

More from the Manufacturer


  • Cooling Fan/Radiator/Water Block/Pump offers better protection with maximum cooling/heating efficiency and convenience
  • Features hydraulic bearing to improve longevity, silence, and stability
  • Colorful argb LEDs add an ultra-modern style
  • 2510-4 Pin connector enables quick and stable connection with cpus

Thermaltake TOUGHAIR 510 CPU Cooler

$95.01

plus Shipping Costs

A single tower dual fan designed CPU cooler equipped with two optimized 120 mm high static pressure fan and a newly designed heat sink, guaranteeing its outstanding performance.

Single Tower Dual Fan Design

TOUGHAIR 510 is a single tower duel fan designed air cooler with 4 heat pipes running through the fins, the U-shape heat pipes increase heat circulation creating better heat dissipation in your system and supports up to 180W.

Enhanced 120 mm high static pressure Fan

TOUGHAIR series utilizes high static pressure fans, which leverages the TOUGHFAN 12 design and boosts the fan speed to 2000 RPM, providing a new level of cooling performance to our CPU cooler.

Asymmetric Fin Structure

The fin is designed with an asymmetric structure that allows larger air intake through the fins. This design lowers the air turbulence and straightens out the airflow making it easier to disperse heat from the fins, delivering superb cooling performance.

High-Performance U-shape copper heat pipes

4 x �6 mm heat pipes directly touch the CPU and thermal paste. The U-shape design creates perfect circulation for better CPU cooling performance.

Universal Compatibility

TOUGHAIR Series are designed to fit Intel and AMD sockets including the following models:

Intel LGA 1200/1156/1155/1151/1150
AMD AM4/AM3+/AM3/AM2+/AM2/FM2/FM1


  • The flawless rotation of up to 2000 rpm is just what you need for prolonged cooling
  • Cooling Fan/Heatsink fan(s) is fully compatible with Socket LGA-1700 processors

Cooler Master Hyper 212 Halo Black – 1 Pack

$73.89

plus Shipping Costs

Cooler Master is relaunching its most acclaimed air cooler with the new Hyper 212 Halo Black. Featuring the all new Halo² fan, the new 212 combines its renowned performance with overhauled aesthetics. The Hyper 212 Halo Black is releasing in an all black design with a matching aluminum top cover. The black coated heat pipes maintain unhindered heat conductivity with a stunning black finish. The all new Halo² fan delivers stunning lighting of the dual loop ARGB and improved performance from its predecessor. The cooler height is designed at 154mm, allowing for a wide range of compatibility in most chassis without compromising cooling capabilities. The installation brackets give you the versatility for the latest platforms on market. We have taken what's best and made it even better - the Hyper 212 Halo Black.

Intuitive ARGB Detection

Intuitive LED detection automatically provides default ARGB spectrum lighting or full ARGB customization via 3-pin header connection.

Black Coated Heat Pipes

4 heat pipes with black finish provide exceptional cooling and aesthetics

Wide Range Compatibility

Compact 154mm height designed for wide chassis compatibility without sacrificing performance

Upgraded Installation Brackets

Redesigned brackets simplify installation on the latest available platforms

Black Aluminum Top Cover

Upscale design featuring aluminum top cover and signature logo

Clean Black Finish

All black finish for a sleek clean look
  • Intuitive ARGB Detection-Intuitive LED detection automatically provides default ARGB spectrum lighting or full ARGB customization via 3-pin header connection.
  • Clean Black Finish - All black finish for a sleek clean look.
  • Aluminum Top Cover - Upscale design featuring aluminum top cover and signature logo.
  • Black Coated Heat Pipes - 4 heat pipes with black finish provide exceptional cooling and aesthetics.
  • Wide Range Compatibility - Compact 154mm height designed for wide chassis compatibility without sacrificing performance.
  • Upgraded Installation Brackets - Redesigned brackets simplify installation on the latest available platforms.

Fractal Design Silent R3 140mm Cooling Fan White

$41.42

plus Shipping Costs

Fractal Design Silent Series R3 fans offer excellent value for money, with good performance and assured reliability.

All Fractal Design Silent Series R3 fans are equipped with long-life rifle bearings and an easy-to-hide, sleek black cable.

Available in a large variety of sizes, ranging from compact 40mm fans to full-size 140mm fans, the Silent Series R3 delivers suitable options for replacing loud or damaged fans in both computers and many other electronic devices.


  • Up to 1000 rpm fan speed and heavy-duty shroud ensure safe and effective cooling
  • Features rifle bearing to improve longevity, silence, and stability
  • Cooling Fan fan(s) with 3-pin connector enables quick and stable connection with cases

Thermaltake TH240 V2 Ultra ARGB Sync All-In-One Liquid Cooler – Snow Edition

$202.12

plus Shipping Costs

The TH V2 Ultra ARGB Snow Series covers various types of builds; the series has two 120mm fan models, including the TH 240/ 360 V2 Ultra ARGB Snow, and two 140mm fan models, including TH 280/ 420 V2 Ultra ARGB Snow.

New Design, Same Quality

TH V2 Ultra ARGB was given an industrial look to freshen up the 2.1" LCD Display. With its 480*480 high resolution, you can easily show off 16.8M color videos or photos.

Personalize Your LCD Display

The TH V2 Ultra LCD Display is highly customizable, from presenting real-time information to playing JPG, GIF, PNG, MP4, MOV, and AVI files or even showing local time and weather information on the display; it can all bring great visual aesthetics to your build.

Sync with CT120 ARGB Fans

Utilizing the CT120 ARGB White Fans on this model, not only you can match up some of our chassis' pre-installed fans, but you can unify your fans with your build!

The CT120 ARGB White provides an 57.05 CFM air flow with 2.23 mm-H2O static pressure while maintaining 25.8 dB-A noise levels.

Enhanced Cooling Surface With A Compact Design

The TH V2 Ultra ARGB Series has a 27mm slim radiator with a thickened 20mm copper chamber, ensuring the same easy installation but with even better cooling performance.

Less Cable, Less Mess

The new cable-integrated daisy-chain design allows the fans to be directly connected, so it minimizes demands of 4-pin PWM and 3-pin ARGB ports on your motherboard and shortens the cable length between the fans. We've also included one PWM cable and one ARGB cable for you to easily manage your cables while assembling your build.

Keeping Your Cables in Place

You might have experienced easily detached 5V ARGB cables when you assemble your builds. Worry not; this 5V ARGB Connector Clip can guarantee that the cables are correctly connected and won't get loose in unexpected conditions.

Keep it COLD with Copper

The high-performance copper base plate accelerates heat conductivity. The high-quality and reliable pump enables maximum water circulation, keeping the copper plate continuously cool. The low evaporation tube effectively decreases the loss of coolant; therefore, no refill is required.

Fully Customizable with TT RGB Plus 2.0

Monitor frequency and real-time temperature directly from the 2.1" LCD display, or customize start-up and standby screens by uploading images or GIFs to add extra flair with the TT RGB Plus 2.0 software.

Any CPU Can Be the Right CPU

The package includes brackets for the latest Intel and AMD CPU sockets to be compatible with the most modern CPU platforms, including the latest Intel LGA1700 and AMD AM5 CPUs.


  • Cooling Fan/Radiator/Water Block/Pump is the single answer to all your desired and heavy-duty cooling/heating needs
  • ARGB LEDs illumination for a modish look
  • The competent 4.72" fan(s) is specially designed for standard cpus

Cooler Master Hyper 622 Halo Black

$94.72

plus Shipping Costs

Cooler Master is advancing the Hyper Series legacy with the debut of the 6 heat pipe Hyper air cooler - the Hyper 622 Halo Black. The Hyper 622 Halo Black follows the Halo Black design with all black color scheme throughout the cooler with the dual loop ARGB lighting of the all new Halo²fans. With the dual tower dual fan design, the 6 heat pipe array dissipates heat impressively to handle the newest CPUs in the market. The new Halo²fans display stunning color and lighting with improved performance from its predecessor. The cooler height is set to 157mm for a wide range of fitment for the majority of chassis without compromising cooling capabilities. The ARGB Auto Detection provides default ARGB spectrum lighting upon power up, or full ARGB customization through the motherboard header. We have expanded the Hyper line with an all new powerful introduction worthy of its name - the Hyper 622 Halo Black.

ARGB Auto Detection

Intuitive LED detection automatically provides default ARGB spectrum lighting or full ARGB customization via 3-pin header connection

Dual Redesigned Halo² Fan

Dual loop LED 120mm Halo² fan features stunning lighting with improved fan performance

Broad Case Fitment

Low profile heat pipes optimized at 157mm height accommodates most RAM and case requirements

Dual Tower Heat Sink

Dual tower heat sink delivers twice the surface area for superior cooling

Black Aluminum Top Cover

Upscale design featuring aluminum top cover and signature logo

6 Heat Pipes Design

Complete CPU coverage nickelplated base with 6 uniform heat pipes transfers heat evenly and quickly


  • ARGB Auto Detection - Intuitive LED detection automatically provides default ARGB spectrum lighting or full ARGB customization via 3-pin header connection.
  • Broad Case Fitment -Low profile heat pipes optimized at 157mm height accommodates most RAM and case requirements.
  • Aluminum Top Cover - Upscale design featuring aluminum top cover and signature logo.
  • Dual Redesigned Halo² Fan - Dual loop LED 120mm Halo² fan features stunning lighting with improved fan performance.
  • Dual Tower Heat Sink - Dual tower heat sink and dual fans deliver twice the surface area for superior cooling.
  • 6 Heat Pipes Design - Complete CPU coverage nickel-plated base with 6 uniform heat pipes transfers heat evenly and quickly.

HPE ML110 Gen10 Redundant Fan with 4 Fans Kit

$288.77

plus Shipping Costs

  • Easy to install and ensures maximum heat dissipation
  • Cooling Module fan(s) is fully compatible with standard servers

AMD Wraith Prism Cooling Fan/Heatsink

$66.00

plus Shipping Costs

  • Colorful rgb LEDs add an ultra-modern style
  • Cooling Fan/Heatsink fan(s) helps the compatible Socket AM4 processors by maintaining a great balance of performance and efficiency

Thermaltake Contac 9 SE CPU Cooler

$53.95

plus Shipping Costs

Contac 9 SE CPU Cooler is an air cooler with a 92mm PWM controlled fan that can produce airflow of 33.12 CFM, 1.02 mm- H2O air pressure while maintaining a 24.5 dB-A noise level. Its aluminum fins and 2 U-shaped heat pipes directly touch the CPU which helps provide adequate heat dissipation. The Contac 9 SE supports the latest Intel LGA 1700 and AM 4 sockets.

Superior Heat Dissipation

The heat sink is made of 0.4mm thick aluminum with 2.5mm air gaps and 2 �6mm solid copper heat pipes that run through the fins for maximum heat conductivity. The heat pipes are made to contact the CPU directly to ensure fast and efficient heat dissipation and enhances the overall thermal performance.

92mm PWM Controlled Fan

The Contac 9 SE is equipped with a 92mm PWM controlled fan that can produce a maximum fan speed of up to 2000 RPM, creating 33.12 CRM airflow and 1.02 mm H2O static pressure while maintaining a 24.5 dB-A noise level due to its hydraulic bearing design. The design of this fan guarantees optimal cooling performance and improves the lifespan of the unit.

Easy Installation of the Fan

The package contents of the Contac 9 SE includes specially designed fan clips that allows users to place the fan on the heat sink firmly and evenly, which makes assembly and dismantling much easier.

Non-Interference Cooling Design

The Contac 9 SE was designed with a non-interference concept, in which users may install high-performance RAM without the CPU cooler getting in the way.

Universal Socket Compatibility

Contac 9 SE now supports the latest Intel LGA 1700 socket, which allows users to stay in the latest trends. It also fits both Intel and AMD sockets, including the following models:

Intel: LGA 1700/1200/1156/1155/1151/1150
AMD: AM4/FM2/FM1/AM3+/AM3/AM2+/AM2


  • Well designed blades and shroud allow the air to flow at 247.8 gal/min over the entire surface to enable effective cooling
  • The competent Cooling Fan/Heatsink fan(s) is specially designed for standard Socket LGA-1700 processors